DRV8886PWPR vs DRV8886ATPWP Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng DRV8886PWPR sa pamamagitan ng Texas Instruments at DRV8886ATPWP sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI
DRV8886PWPR ✓ NakahandaTexas Instruments
DRV8886ATPWP - 37V 2A Bipolar Stepper Driver | Texas Instruments
DRV8886ATPWP ✓ NakahandaPagsanggunian na paghahambing
| Parametro | DRV8886PWPR | DRV8886ATPWP |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | Motor Drivers | Motor Drivers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Motor Type | Bipolar stepper (2-phase) | Bipolar Stepper |
| Number of Full H-Bridges | 2 | 2 |
| Operating Supply Voltage (VM) | 8 V to 37 V | — |
| Absolute Maximum VM | 40 V | — |
| Full-Scale Output Current (per phase) | 2 A | — |
| RMS Output Current | 1.4 A (24 V, TA = 25 C, PCB-dependent) | 1.4 A (24 V, TA=25°C, PCB design-dependent) |
| Peak Output Current | 3 A | 3 A |
| HS + LS On-Resistance (RDSon) | 550 mOhm | 550 mΩ |
| Microstepping Levels | Up to 1/16 step | Full to 1/16 step |
| Control Interface | STEP / DIR | STEP / DIR (Hardware GPIO) |
| Current Sensing | Internal (no external sense resistor) | — |
| Decay Modes | 8 configurable modes including Smart Tune | Smart tune, mixed, slow, fast (programmable) |
| PWM Chopping Frequency | Up to 50 kHz | Up to 100 kHz |
| Sleep Current | 20 uA (typical) | 20 µA |
| Logic Supply Voltage (VINT) | 3 V to 5.5 V | — |
| Hanay ng Temperature na Operasyon | -40 C to +125 C | -40°C to +125°C |
| Packhaging | HTSSOP-24 (PWP) with PowerPAD | HTSSOP-24 (PWP) PowerPAD |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Protection Features | UVLO, OCP, TSD, open-load detect, charge-pump UV | — |
| Fault Output | nFAULT (active-low, open-drain) | — |
| AEC-Q100 Qualified | No (use DRV8886ATPWP for automotive) | — |
| Tindminan RoHS | Compliant | Compliant |
| Load Voltage Rating (VM max) | — | 37 V |
| Minimum Operating VM | — | 8 V |
| Logic Supply Voltage (VCC) | — | 3 V to 5.5 V |
| Full-Scale Output Current | — | 2 A (per H-bridge, 25°C PCB-dependent) |
| Integrated Current Sense | — | Yes (internal sense, no external resistors) |
| AutoTune / Smart Tune Decay | — | Yes |
| Temperature Grade | — | Automotive |
| Level ng MSL | — | 2 (per JEDEC J-STD-020) |
| Terminal Finish | — | Nickel-Palladium-Gold |
| Peak Reflow Temperature | — | 260°C |