DRV8886PWPR vs DRV8886ATPWP Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci DRV8886PWPR disebabkan oleh Texas Instruments dan DRV8886ATPWP disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
DRV8886ATPWP - 37V 2A Bipolar Stepper Driver | Texas Instruments
DRV8886ATPWP ✓ AktifPengandingan Spesifikasi
| Parametr | DRV8886PWPR | DRV8886ATPWP |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Motor Drivers | Motor Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Motor Type | Bipolar stepper (2-phase) | Bipolar Stepper |
| Number of Full H-Bridges | 2 | 2 |
| Operating Supply Voltage (VM) | 8 V to 37 V | — |
| Absolute Maximum VM | 40 V | — |
| Full-Scale Output Current (per phase) | 2 A | — |
| RMS Output Current | 1.4 A (24 V, TA = 25 C, PCB-dependent) | 1.4 A (24 V, TA=25°C, PCB design-dependent) |
| Peak Output Current | 3 A | 3 A |
| HS + LS On-Resistance (RDSon) | 550 mOhm | 550 mΩ |
| Microstepping Levels | Up to 1/16 step | Full to 1/16 step |
| Control Interface | STEP / DIR | STEP / DIR (Hardware GPIO) |
| Current Sensing | Internal (no external sense resistor) | — |
| Decay Modes | 8 configurable modes including Smart Tune | Smart tune, mixed, slow, fast (programmable) |
| PWM Chopping Frequency | Up to 50 kHz | Up to 100 kHz |
| Sleep Current | 20 uA (typical) | 20 µA |
| Logic Supply Voltage (VINT) | 3 V to 5.5 V | — |
| Gambaran Suhu Operasi | -40 C to +125 C | -40°C to +125°C |
| Kemasan | HTSSOP-24 (PWP) with PowerPAD | HTSSOP-24 (PWP) PowerPAD |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Protection Features | UVLO, OCP, TSD, open-load detect, charge-pump UV | — |
| Fault Output | nFAULT (active-low, open-drain) | — |
| AEC-Q100 Qualified | No (use DRV8886ATPWP for automotive) | — |
| Status RoHS | Compliant | Compliant |
| Load Voltage Rating (VM max) | — | 37 V |
| Minimum Operating VM | — | 8 V |
| Logic Supply Voltage (VCC) | — | 3 V to 5.5 V |
| Full-Scale Output Current | — | 2 A (per H-bridge, 25°C PCB-dependent) |
| Integrated Current Sense | — | Yes (internal sense, no external resistors) |
| AutoTune / Smart Tune Decay | — | Yes |
| Temperature Grade | — | Automotive |
| Aras MSL | — | 2 (per JEDEC J-STD-020) |
| Terminal Finish | — | Nickel-Palladium-Gold |
| Peak Reflow Temperature | — | 260°C |