DRV8886PWPR vs TMP816PWR Comparison

Detailed side-by-side comparison of DRV8886PWPR by Texas Instruments and TMP816PWR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Texas Instruments
DRV8886PWPR DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI

DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI

DRV8886PWPR ✓ Active
Texas Instruments
TMP816PWR TMP816PWR - 18V Single-Phase BLDC Fan-Motor Predriver | TI

TMP816PWR - 18V Single-Phase BLDC Fan-Motor Predriver | TI

TMP816PWR ✓ Active

Specification Comparison

Parameter DRV8886PWPR TMP816PWR
Brand Texas Instruments Texas Instruments
Category Motor Drivers Motor Drivers
Lifecycle Status Active Active
Stock Status In Stock In Stock
Unit Price (USD) $1.52 $0.39
Motor Type Bipolar stepper (2-phase) —
Number of Full H-Bridges 2 —
Operating Supply Voltage (VM) 8 V to 37 V —
Absolute Maximum VM 40 V —
Full-Scale Output Current (per phase) 2 A —
RMS Output Current 1.4 A (24 V, TA = 25 C, PCB-dependent) —
Peak Output Current 3 A —
HS + LS On-Resistance (RDSon) 550 mOhm —
Microstepping Levels Up to 1/16 step —
Control Interface STEP / DIR —
Current Sensing Internal (no external sense resistor) —
Decay Modes 8 configurable modes including Smart Tune —
PWM Chopping Frequency Up to 50 kHz —
Sleep Current 20 uA (typical) —
Logic Supply Voltage (VINT) 3 V to 5.5 V —
Operating Temperature Range -40 C to +125 C -30 °C to +95 °C
Package HTSSOP-24 (PWP) with PowerPAD 20-pin TSSOP (PW), 4.40 mm width
Mounting Type Surface Mount Surface Mount
Protection Features UVLO, OCP, TSD, open-load detect, charge-pump UV Thermal shutdown, adjustable current limit, lock-rotor protection
Fault Output nFAULT (active-low, open-drain) —
AEC-Q100 Qualified No (use DRV8886ATPWP for automotive) —
RoHS Status Compliant Compliant
Topology — Single-phase full-wave BLDC fan predriver
Supply Voltage (VCC) — 6 V to 16 V
Maximum Supply Voltage — 18 V
Load Voltage — 10 V
Output Current — 20 mA (gate drive to external PNP+NMOS)
Number of Outputs — 1 (pre-driver output pair)
Current Limit Threshold — Adjustable (external resistor)
Control Input — PWM speed command
Tachometer Output — FG (frequency-generator) signal
External Power Stage — PNP + N-channel MOSFET pair
MSL Level — 1 (unlimited floor life at <30 °C / 85 % RH)
Lead-Free — Yes
Drive Method — Full-wave, sensored (Hall-element input)

Datasheets & Resources

Browse All Products Create BOM Request Quote