DRV8886PWPR vs TMP816PWR So sánh

So sánh chi tiết song song của DRV8886PWPR bằng Texas Instruments và TMP816PWR bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
DRV8886PWPR DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI

DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI

DRV8886PWPR ✓ Hoạt động
Texas Instruments
TMP816PWR TMP816PWR - 18V Single-Phase BLDC Fan-Motor Predriver | TI

TMP816PWR - 18V Single-Phase BLDC Fan-Motor Predriver | TI

TMP816PWR ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số DRV8886PWPR TMP816PWR
Thương hiệu Texas Instruments Texas Instruments
Danh mục Motor Drivers Motor Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Motor Type Bipolar stepper (2-phase) —
Number of Full H-Bridges 2 —
Operating Supply Voltage (VM) 8 V to 37 V —
Absolute Maximum VM 40 V —
Full-Scale Output Current (per phase) 2 A —
RMS Output Current 1.4 A (24 V, TA = 25 C, PCB-dependent) —
Peak Output Current 3 A —
HS + LS On-Resistance (RDSon) 550 mOhm —
Microstepping Levels Up to 1/16 step —
Control Interface STEP / DIR —
Current Sensing Internal (no external sense resistor) —
Decay Modes 8 configurable modes including Smart Tune —
PWM Chopping Frequency Up to 50 kHz —
Sleep Current 20 uA (typical) —
Logic Supply Voltage (VINT) 3 V to 5.5 V —
Khoảng nhiệt độ hoạt động -40 C to +125 C -30 °C to +95 °C
Hộp HTSSOP-24 (PWP) with PowerPAD 20-pin TSSOP (PW), 4.40 mm width
Kiểu lắp đặt Surface Mount Surface Mount
Protection Features UVLO, OCP, TSD, open-load detect, charge-pump UV Thermal shutdown, adjustable current limit, lock-rotor protection
Fault Output nFAULT (active-low, open-drain) —
AEC-Q100 Qualified No (use DRV8886ATPWP for automotive) —
Trạng thái RoHS Compliant Compliant
Cấu trúc — Single-phase full-wave BLDC fan predriver
Supply Voltage (VCC) — 6 V to 16 V
Maximum Supply Voltage — 18 V
Load Voltage — 10 V
Output Current — 20 mA (gate drive to external PNP+NMOS)
Số lượng đầu ra — 1 (pre-driver output pair)
Current Limit Threshold — Adjustable (external resistor)
Control Input — PWM speed command
Tachometer Output — FG (frequency-generator) signal
External Power Stage — PNP + N-channel MOSFET pair
Cấp MSL — 1 (unlimited floor life at <30 °C / 85 % RH)
Lead-Free — Yes
Drive Method — Full-wave, sensored (Hall-element input)

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá