DRV8886PWPR vs TMP816PWR तुलना

विस्तृत दोनों ओर की तुलना DRV8886PWPR द्वारा Texas Instruments और TMP816PWR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
DRV8886PWPR DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI

DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI

DRV8886PWPR ✓ सक्रिय
Texas Instruments
TMP816PWR TMP816PWR - 18V Single-Phase BLDC Fan-Motor Predriver | TI

TMP816PWR - 18V Single-Phase BLDC Fan-Motor Predriver | TI

TMP816PWR ✓ सक्रिय

विशेषता तुलना

पैरामीटर DRV8886PWPR TMP816PWR
ब्रांड Texas Instruments Texas Instruments
श्रेणी Motor Drivers Motor Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Motor Type Bipolar stepper (2-phase) —
Number of Full H-Bridges 2 —
Operating Supply Voltage (VM) 8 V to 37 V —
Absolute Maximum VM 40 V —
Full-Scale Output Current (per phase) 2 A —
RMS Output Current 1.4 A (24 V, TA = 25 C, PCB-dependent) —
Peak Output Current 3 A —
HS + LS On-Resistance (RDSon) 550 mOhm —
Microstepping Levels Up to 1/16 step —
Control Interface STEP / DIR —
Current Sensing Internal (no external sense resistor) —
Decay Modes 8 configurable modes including Smart Tune —
PWM Chopping Frequency Up to 50 kHz —
Sleep Current 20 uA (typical) —
Logic Supply Voltage (VINT) 3 V to 5.5 V —
ऑपरेटिंग तापमान रेंज -40 C to +125 C -30 °C to +95 °C
पैकेज HTSSOP-24 (PWP) with PowerPAD 20-pin TSSOP (PW), 4.40 mm width
माउंटिंग प्रकार Surface Mount Surface Mount
Protection Features UVLO, OCP, TSD, open-load detect, charge-pump UV Thermal shutdown, adjustable current limit, lock-rotor protection
Fault Output nFAULT (active-low, open-drain) —
AEC-Q100 Qualified No (use DRV8886ATPWP for automotive) —
RoHS स्थिति Compliant Compliant
टोपोलॉजी — Single-phase full-wave BLDC fan predriver
Supply Voltage (VCC) — 6 V to 16 V
Maximum Supply Voltage — 18 V
Load Voltage — 10 V
Output Current — 20 mA (gate drive to external PNP+NMOS)
आउटपुट की संख्या — 1 (pre-driver output pair)
Current Limit Threshold — Adjustable (external resistor)
Control Input — PWM speed command
Tachometer Output — FG (frequency-generator) signal
External Power Stage — PNP + N-channel MOSFET pair
MSL स्तर — 1 (unlimited floor life at <30 °C / 85 % RH)
Lead-Free — Yes
Drive Method — Full-wave, sensored (Hall-element input)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध