DRV8886PWPR vs TMP816PWR Comparaison
Comparaison détaillée côte à côte de DRV8886PWPR par Texas Instruments et TMP816PWR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | DRV8886PWPR | TMP816PWR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Motor Drivers | Motor Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,52 | $0,39 |
| Motor Type | Bipolar stepper (2-phase) | — |
| Number of Full H-Bridges | 2 | — |
| Operating Supply Voltage (VM) | 8 V to 37 V | — |
| Absolute Maximum VM | 40 V | — |
| Full-Scale Output Current (per phase) | 2 A | — |
| RMS Output Current | 1.4 A (24 V, TA = 25 C, PCB-dependent) | — |
| Peak Output Current | 3 A | — |
| HS + LS On-Resistance (RDSon) | 550 mOhm | — |
| Microstepping Levels | Up to 1/16 step | — |
| Control Interface | STEP / DIR | — |
| Current Sensing | Internal (no external sense resistor) | — |
| Decay Modes | 8 configurable modes including Smart Tune | — |
| PWM Chopping Frequency | Up to 50 kHz | — |
| Sleep Current | 20 uA (typical) | — |
| Logic Supply Voltage (VINT) | 3 V to 5.5 V | — |
| Plage de température de fonctionnement | -40 C to +125 C | -30 °C to +95 °C |
| Boîtier | HTSSOP-24 (PWP) with PowerPAD | 20-pin TSSOP (PW), 4.40 mm width |
| Type de montage | Surface Mount | Surface Mount |
| Protection Features | UVLO, OCP, TSD, open-load detect, charge-pump UV | Thermal shutdown, adjustable current limit, lock-rotor protection |
| Fault Output | nFAULT (active-low, open-drain) | — |
| AEC-Q100 Qualified | No (use DRV8886ATPWP for automotive) | — |
| Statut RoHS | Compliant | Compliant |
| Topologie | — | Single-phase full-wave BLDC fan predriver |
| Supply Voltage (VCC) | — | 6 V to 16 V |
| Maximum Supply Voltage | — | 18 V |
| Load Voltage | — | 10 V |
| Output Current | — | 20 mA (gate drive to external PNP+NMOS) |
| Nombre de sorties | — | 1 (pre-driver output pair) |
| Current Limit Threshold | — | Adjustable (external resistor) |
| Control Input | — | PWM speed command |
| Tachometer Output | — | FG (frequency-generator) signal |
| External Power Stage | — | PNP + N-channel MOSFET pair |
| Niveau MSL | — | 1 (unlimited floor life at <30 °C / 85 % RH) |
| Lead-Free | — | Yes |
| Drive Method | — | Full-wave, sensored (Hall-element input) |