INA114BP vs INA111BP Comparison
Detailed side-by-side comparison of INA114BP by Texas Instruments and INA111BP by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA111BP - 2MHz FET-Input Instrumentation Amp | Texas Instruments
INA111BP ✓ ActiveSpecification Comparison
| Parameter | INA114BP | INA111BP |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Precision instrumentation amplifier | — |
| Number of Amplifiers | 1 circuit | — |
| Architecture | Three-op-amp instrumentation amplifier | — |
| Gain Range | 1 to 10,000 | 1 to greater than 1000 |
| Gain-Bandwidth Product | 1 MHz | — |
| Input Noise | 11 nV/sqrt(Hz) | — |
| Input Offset Voltage | 50 uV maximum | — |
| Input Offset Drift | 0.25 uV/degree C maximum | — |
| Input Bias Current | 2 nA maximum | 20 pA maximum |
| Common-Mode Rejection Ratio | 115 dB minimum | 106 dB minimum |
| Input Overvoltage Protection | +/-40 V | — |
| Supply Voltage | +/-18 V maximum | — |
| Quiescent Current | 3 mA maximum | — |
| Operating Temperature Range | -40 degrees C to +85 degrees C | [DATA_NEEDED: operating temperature range] |
| Package | 8-pin PDIP | 8-pin PDIP |
| Mounting Type | Through-hole | Through-hole |
| Gain Configuration | Single external resistor | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | unknown |
| Number of Circuits | — | 1 circuit |
| Device Type | — | High-speed FET-input instrumentation amplifier |
| Offset Voltage | — | 500 uV maximum |
| Offset Voltage Drift | — | 5 uV/°C maximum |
| Bandwidth | — | 2 MHz at gain 10 |
| Settling Time | — | 4 us to 0.01% at gain 100 |
| Slew Rate | — | 17 V/us |
| Gain Setting | — | One external resistor |
| Signal Topology | — | Current-feedback |
| Input Stage | — | FET input |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Output Voltage Range | — | [DATA_NEEDED: output voltage range] |
| REACH Status | — | unknown |