INA114BP vs INA111BP Vergleich
Detaillierter Direktvergleich von INA114BP von Texas Instruments und INA111BP von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
INA111BP - 2MHz FET-Input Instrumentation Amp | Texas Instruments
INA111BP ✓ AktivSpezifikationsvergleich
| Parameter | INA114BP | INA111BP |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Precision instrumentation amplifier | — |
| Number of Amplifiers | 1 circuit | — |
| Architecture | Three-op-amp instrumentation amplifier | — |
| Gain Range | 1 to 10,000 | 1 to greater than 1000 |
| Gain-Bandwidth Product | 1 MHz | — |
| Input Noise | 11 nV/sqrt(Hz) | — |
| Input Offset Voltage | 50 uV maximum | — |
| Input Offset Drift | 0.25 uV/degree C maximum | — |
| Input Bias Current | 2 nA maximum | 20 pA maximum |
| Common-Mode Rejection Ratio | 115 dB minimum | 106 dB minimum |
| Input Overvoltage Protection | +/-40 V | — |
| Versorgungsspannung | +/-18 V maximum | — |
| Ruhestrom | 3 mA maximum | — |
| Betriebstemperaturbereich | -40 degrees C to +85 degrees C | [DATA_NEEDED: operating temperature range] |
| Gehäuse | 8-pin PDIP | 8-pin PDIP |
| Montageart | Through-hole | Through-hole |
| Gain Configuration | Single external resistor | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | unknown |
| Number of Circuits | — | 1 circuit |
| Device Type | — | High-speed FET-input instrumentation amplifier |
| Offset Voltage | — | 500 uV maximum |
| Offset Voltage Drift | — | 5 uV/°C maximum |
| Bandwidth | — | 2 MHz at gain 10 |
| Settling Time | — | 4 us to 0.01% at gain 100 |
| Slew Rate | — | 17 V/us |
| Gain Setting | — | One external resistor |
| Signal Topology | — | Current-feedback |
| Input Stage | — | FET input |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Ausgangsspannungsbereich | — | [DATA_NEEDED: output voltage range] |
| REACH Status | — | unknown |