INA114BP vs INA111BP Comparaison
Comparaison détaillée côte à côte de INA114BP par Texas Instruments et INA111BP par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA111BP - 2MHz FET-Input Instrumentation Amp | Texas Instruments
INA111BP ✓ ActifComparaison des spécifications
| Paramètre | INA114BP | INA111BP |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Precision instrumentation amplifier | — |
| Number of Amplifiers | 1 circuit | — |
| Architecture | Three-op-amp instrumentation amplifier | — |
| Gain Range | 1 to 10,000 | 1 to greater than 1000 |
| Gain-Bandwidth Product | 1 MHz | — |
| Input Noise | 11 nV/sqrt(Hz) | — |
| Input Offset Voltage | 50 uV maximum | — |
| Input Offset Drift | 0.25 uV/degree C maximum | — |
| Input Bias Current | 2 nA maximum | 20 pA maximum |
| Common-Mode Rejection Ratio | 115 dB minimum | 106 dB minimum |
| Input Overvoltage Protection | +/-40 V | — |
| Tension d'alimentation | +/-18 V maximum | — |
| Courant de repos | 3 mA maximum | — |
| Plage de température de fonctionnement | -40 degrees C to +85 degrees C | [DATA_NEEDED: operating temperature range] |
| Boîtier | 8-pin PDIP | 8-pin PDIP |
| Type de montage | Through-hole | Through-hole |
| Gain Configuration | Single external resistor | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | unknown |
| Number of Circuits | — | 1 circuit |
| Device Type | — | High-speed FET-input instrumentation amplifier |
| Offset Voltage | — | 500 uV maximum |
| Offset Voltage Drift | — | 5 uV/°C maximum |
| Bandwidth | — | 2 MHz at gain 10 |
| Settling Time | — | 4 us to 0.01% at gain 100 |
| Slew Rate | — | 17 V/us |
| Gain Setting | — | One external resistor |
| Signal Topology | — | Current-feedback |
| Input Stage | — | FET input |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Plage de tension de sortie | — | [DATA_NEEDED: output voltage range] |
| REACH Status | — | unknown |