INA114BP vs INA111BP Comparación
Comparación detallada lado a lado de INA114BP por Texas Instruments y INA111BP por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
INA111BP - 2MHz FET-Input Instrumentation Amp | Texas Instruments
INA111BP ✓ ActivoComparación de especificaciones
| Parámetro | INA114BP | INA111BP |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Precision instrumentation amplifier | — |
| Number of Amplifiers | 1 circuit | — |
| Architecture | Three-op-amp instrumentation amplifier | — |
| Gain Range | 1 to 10,000 | 1 to greater than 1000 |
| Gain-Bandwidth Product | 1 MHz | — |
| Input Noise | 11 nV/sqrt(Hz) | — |
| Input Offset Voltage | 50 uV maximum | — |
| Input Offset Drift | 0.25 uV/degree C maximum | — |
| Input Bias Current | 2 nA maximum | 20 pA maximum |
| Common-Mode Rejection Ratio | 115 dB minimum | 106 dB minimum |
| Input Overvoltage Protection | +/-40 V | — |
| Tensión de alimentación | +/-18 V maximum | — |
| Corriente en reposo | 3 mA maximum | — |
| Rango de temperatura de funcionamiento | -40 degrees C to +85 degrees C | [DATA_NEEDED: operating temperature range] |
| Encapsulado | 8-pin PDIP | 8-pin PDIP |
| Tipo de montaje | Through-hole | Through-hole |
| Gain Configuration | Single external resistor | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | unknown |
| Number of Circuits | — | 1 circuit |
| Device Type | — | High-speed FET-input instrumentation amplifier |
| Offset Voltage | — | 500 uV maximum |
| Offset Voltage Drift | — | 5 uV/°C maximum |
| Bandwidth | — | 2 MHz at gain 10 |
| Settling Time | — | 4 us to 0.01% at gain 100 |
| Slew Rate | — | 17 V/us |
| Gain Setting | — | One external resistor |
| Signal Topology | — | Current-feedback |
| Input Stage | — | FET input |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Rango de tensión de salida | — | [DATA_NEEDED: output voltage range] |
| REACH Status | — | unknown |