INA115BU vs INA115BUG4 Comparison
Detailed side-by-side comparison of INA115BU by Texas Instruments and INA115BUG4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | INA115BU | INA115BUG4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Precision instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp instrumentation amplifier |
| Bandwidth | 1 MHz | — |
| Maximum Offset Voltage | 50 uV | — |
| Input Offset Voltage Drift | 0.25 uV/degree C maximum | — |
| Input Noise Density | 11 nV/sqrt(Hz) | 11 nV/√Hz |
| Maximum Input Bias Current | 2 nA | — |
| Minimum Common-Mode Rejection | 115 dB | — |
| Input Over-Voltage Protection | plus or minus 40 V | — |
| Supply Voltage Range | 2.25 V to 18 V | 2.25 V to 18 V |
| Maximum Total Supply Voltage | plus or minus 18 V | — |
| Slew Rate | 0.6 V/us | 0.6 V/µs |
| Maximum Quiescent Current | 3 mA | — |
| Number of Amplifiers | 1 circuit | 3 amplifiers |
| Package | 16-pin SOIC | 16-SOIC, 0.295 inch (7.50 mm) body width |
| Mounting Type | Surface mount | Surface mount |
| Switched Gain | Enabled through exposed input-amplifier connections | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Product Type | — | Precision instrumentation amplifier |
| Gain-Bandwidth Product | — | 1 MHz |
| Input Offset Voltage | — | 50 µV |
| Power Consumption | — | 3 mA |
| Maximum Supply Voltage | — | 50 V |
| Output Type | — | Single-ended |
| Internal Amplifier Connections | — | A1 and A2 connections |
| Operating Temperature Range | — | [DATA_NEEDED: operating temperature range] |
| Gain Range | — | [DATA_NEEDED: gain range] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance] |