INA115BU vs INA115BUG4 Comparaison

Comparaison détaillée côte à côte de INA115BU par Texas Instruments et INA115BUG4 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
INA115BU INA115BU - 1MHz Low-Noise INA | Texas Instruments

INA115BU - 1MHz Low-Noise INA | Texas Instruments

INA115BU ✓ Actif
Texas Instruments
INA115BUG4 INA115BUG4 - 1MHz Precision Instrumentation Amplifier | TI

INA115BUG4 - 1MHz Precision Instrumentation Amplifier | TI

INA115BUG4 ✓ Actif

Comparaison des spécifications

Paramètre INA115BU INA115BUG4
Marque Texas Instruments Texas Instruments
Catégorie Amplifier ICs Amplifier ICs
Statut du cycle de vie Actif Actif
Amplifier Type Precision instrumentation amplifier —
Architecture Three-op-amp instrumentation amplifier Three-op-amp instrumentation amplifier
Bandwidth 1 MHz —
Maximum Offset Voltage 50 uV —
Input Offset Voltage Drift 0.25 uV/degree C maximum —
Input Noise Density 11 nV/sqrt(Hz) 11 nV/√Hz
Maximum Input Bias Current 2 nA —
Minimum Common-Mode Rejection 115 dB —
Input Over-Voltage Protection plus or minus 40 V —
Supply Voltage Range 2.25 V to 18 V 2.25 V to 18 V
Maximum Total Supply Voltage plus or minus 18 V —
Slew Rate 0.6 V/us 0.6 V/µs
Maximum Quiescent Current 3 mA —
Number of Amplifiers 1 circuit 3 amplifiers
Boîtier 16-pin SOIC 16-SOIC, 0.295 inch (7.50 mm) body width
Type de montage Surface mount Surface mount
Switched Gain Enabled through exposed input-amplifier connections —
Statut RoHS [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
Product Type — Precision instrumentation amplifier
Gain-Bandwidth Product — 1 MHz
Input Offset Voltage — 50 µV
Power Consumption — 3 mA
Maximum Supply Voltage — 50 V
Type de sortie — Single-ended
Internal Amplifier Connections — A1 and A2 connections
Plage de température de fonctionnement — [DATA_NEEDED: operating temperature range]
Gain Range — [DATA_NEEDED: gain range]
Input Common-Mode Range — [DATA_NEEDED: input common-mode range]
Output Voltage Swing — [DATA_NEEDED: output voltage swing]
Input Bias Current — [DATA_NEEDED: input bias current]
Gain Error — [DATA_NEEDED: gain error]
RoHS Compliance — [DATA_NEEDED: RoHS compliance]
REACH Compliance — [DATA_NEEDED: REACH compliance]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis