INA115BU vs INA115BUG4 比較
詳細並排比較 INA115BU 由 Texas Instruments 與 INA115BUG4 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | INA115BU | INA115BUG4 |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Amplifier Type | Precision instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp instrumentation amplifier |
| Bandwidth | 1 MHz | — |
| Maximum Offset Voltage | 50 uV | — |
| Input Offset Voltage Drift | 0.25 uV/degree C maximum | — |
| Input Noise Density | 11 nV/sqrt(Hz) | 11 nV/√Hz |
| Maximum Input Bias Current | 2 nA | — |
| Minimum Common-Mode Rejection | 115 dB | — |
| Input Over-Voltage Protection | plus or minus 40 V | — |
| Supply Voltage Range | 2.25 V to 18 V | 2.25 V to 18 V |
| Maximum Total Supply Voltage | plus or minus 18 V | — |
| Slew Rate | 0.6 V/us | 0.6 V/µs |
| Maximum Quiescent Current | 3 mA | — |
| Number of Amplifiers | 1 circuit | 3 amplifiers |
| 封裝 | 16-pin SOIC | 16-SOIC, 0.295 inch (7.50 mm) body width |
| 安裝類型 | Surface mount | Surface mount |
| Switched Gain | Enabled through exposed input-amplifier connections | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Product Type | — | Precision instrumentation amplifier |
| Gain-Bandwidth Product | — | 1 MHz |
| Input Offset Voltage | — | 50 µV |
| Power Consumption | — | 3 mA |
| Maximum Supply Voltage | — | 50 V |
| 輸出類型 | — | Single-ended |
| Internal Amplifier Connections | — | A1 and A2 connections |
| 工作溫度範圍 | — | [DATA_NEEDED: operating temperature range] |
| Gain Range | — | [DATA_NEEDED: gain range] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance] |