INA115BU vs INA115BUG4 Karşılaştırma
Ayrıntılı yan yana karşılaştırma INA115BU tarafından Texas Instruments ve INA115BUG4 tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | INA115BU | INA115BUG4 |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Type | Precision instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp instrumentation amplifier |
| Bandwidth | 1 MHz | — |
| Maximum Offset Voltage | 50 uV | — |
| Input Offset Voltage Drift | 0.25 uV/degree C maximum | — |
| Input Noise Density | 11 nV/sqrt(Hz) | 11 nV/√Hz |
| Maximum Input Bias Current | 2 nA | — |
| Minimum Common-Mode Rejection | 115 dB | — |
| Input Over-Voltage Protection | plus or minus 40 V | — |
| Supply Voltage Range | 2.25 V to 18 V | 2.25 V to 18 V |
| Maximum Total Supply Voltage | plus or minus 18 V | — |
| Slew Rate | 0.6 V/us | 0.6 V/µs |
| Maximum Quiescent Current | 3 mA | — |
| Number of Amplifiers | 1 circuit | 3 amplifiers |
| Paket | 16-pin SOIC | 16-SOIC, 0.295 inch (7.50 mm) body width |
| Montaj Türü | Surface mount | Surface mount |
| Switched Gain | Enabled through exposed input-amplifier connections | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Product Type | — | Precision instrumentation amplifier |
| Gain-Bandwidth Product | — | 1 MHz |
| Input Offset Voltage | — | 50 µV |
| Power Consumption | — | 3 mA |
| Maximum Supply Voltage | — | 50 V |
| Çıkış Türü | — | Single-ended |
| Internal Amplifier Connections | — | A1 and A2 connections |
| İşletim Sıcaklığı Aralığı | — | [DATA_NEEDED: operating temperature range] |
| Gain Range | — | [DATA_NEEDED: gain range] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance] |