INA116UA vs INA116UAG4 Comparison
Detailed side-by-side comparison of INA116UA by Texas Instruments and INA116UAG4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA116UA - 3fA Ultra-Low Bias In-Amp SOIC-16 | Texas Instruments
INA116UA ✓ ActiveTexas Instruments
INA116UAG4 - 3 fA Input Bias Instrumentation Amplifier | Texas Instruments
INA116UAG4 ObsoleteSpecification Comparison
| Parameter | INA116UA | INA116UAG4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Obsolete |
| Amplifier Type | Instrumentation Amplifier | Standard general-purpose instrumentation amplifier |
| Number of Channels | 1 | — |
| Input Bias Current | 3 fA typ at 25C | — |
| Input Bias Current at 85C | 25 fA | — |
| Input Offset Voltage | 2 mV max | — |
| Gain Range | 1 V/V to 1000 V/V (single external resistor) | 1 to 1000 |
| Bandwidth | 800 kHz | 800 kHz -3 dB |
| Input Voltage Noise | 28 nV/sqrt(Hz) at 1 kHz | — |
| Supply Voltage Range | 9 V to 36 V total (dual or single supply) | [DATA_NEEDED: supply voltage range] |
| Quiescent Current | 1 mA | — |
| Input Topology | Difet FET inputs with buffered guard drive | — |
| Guard Drive Pins | Yes (buffered, adjacent to both inputs) | — |
| Input Overvoltage Protection | Yes (internal) | — |
| Package | 16-SOIC (0.295 in, 7.50 mm width) | 16-pin SOIC |
| Mounting Type | Surface Mount | Surface mount |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Product Type | — | Ultra-low-input-bias-current instrumentation amplifier |
| Input Bias Current at 25°C | — | 3 fA typical |
| Input Bias Current at 85°C | — | 25 fA typical |
| Gain Setting Method | — | 1 external resistor |
| Internal Topology | — | 3-op-amp instrumentation amplifier |
| Input Stage | — | Monolithic FET input |
| Slew Rate | — | 0.8 V/µs |
| Number of Circuits | — | 1 circuit |
| Differential Input | — | Yes |
| Input Guarding | — | Special input guarding techniques |
| Package Code | — | UA |
| Temperature Grade | — | Industrial |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Output Voltage Range | — | [DATA_NEEDED: output voltage range] |
| REACH Status | — | [DATA_NEEDED: REACH compliance] |