INA116UA vs INA116UAG4 So sánh
So sánh chi tiết song song của INA116UA bằng Texas Instruments và INA116UAG4 bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
INA116UA - 3fA Ultra-Low Bias In-Amp SOIC-16 | Texas Instruments
INA116UA ✓ Hoạt độngTexas Instruments
INA116UAG4 - 3 fA Input Bias Instrumentation Amplifier | Texas Instruments
INA116UAG4 ObsoleteSo sánh thông số kỹ thuật
| Tham số | INA116UA | INA116UAG4 |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Obsolete |
| Amplifier Type | Instrumentation Amplifier | Standard general-purpose instrumentation amplifier |
| Number of Channels | 1 | — |
| Input Bias Current | 3 fA typ at 25C | — |
| Input Bias Current at 85C | 25 fA | — |
| Input Offset Voltage | 2 mV max | — |
| Gain Range | 1 V/V to 1000 V/V (single external resistor) | 1 to 1000 |
| Bandwidth | 800 kHz | 800 kHz -3 dB |
| Input Voltage Noise | 28 nV/sqrt(Hz) at 1 kHz | — |
| Supply Voltage Range | 9 V to 36 V total (dual or single supply) | [DATA_NEEDED: supply voltage range] |
| Điện áp yên tĩnh | 1 mA | — |
| Input Topology | Difet FET inputs with buffered guard drive | — |
| Guard Drive Pins | Yes (buffered, adjacent to both inputs) | — |
| Input Overvoltage Protection | Yes (internal) | — |
| Hộp | 16-SOIC (0.295 in, 7.50 mm width) | 16-pin SOIC |
| Kiểu lắp đặt | Surface Mount | Surface mount |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Product Type | — | Ultra-low-input-bias-current instrumentation amplifier |
| Input Bias Current at 25°C | — | 3 fA typical |
| Input Bias Current at 85°C | — | 25 fA typical |
| Gain Setting Method | — | 1 external resistor |
| Internal Topology | — | 3-op-amp instrumentation amplifier |
| Input Stage | — | Monolithic FET input |
| Slew Rate | — | 0.8 V/µs |
| Number of Circuits | — | 1 circuit |
| Differential Input | — | Yes |
| Input Guarding | — | Special input guarding techniques |
| Package Code | — | UA |
| Temperature Grade | — | Industrial |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Khoảng điện áp đầu ra | — | [DATA_NEEDED: output voltage range] |
| REACH Status | — | [DATA_NEEDED: REACH compliance] |