INA116UA vs INA116UAG4 Comparación
Comparación detallada lado a lado de INA116UA por Texas Instruments y INA116UAG4 por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
INA116UA - 3fA Ultra-Low Bias In-Amp SOIC-16 | Texas Instruments
INA116UA ✓ ActivoTexas Instruments
INA116UAG4 - 3 fA Input Bias Instrumentation Amplifier | Texas Instruments
INA116UAG4 ObsoleteComparación de especificaciones
| Parámetro | INA116UA | INA116UAG4 |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Obsolete |
| Amplifier Type | Instrumentation Amplifier | Standard general-purpose instrumentation amplifier |
| Number of Channels | 1 | — |
| Input Bias Current | 3 fA typ at 25C | — |
| Input Bias Current at 85C | 25 fA | — |
| Input Offset Voltage | 2 mV max | — |
| Gain Range | 1 V/V to 1000 V/V (single external resistor) | 1 to 1000 |
| Bandwidth | 800 kHz | 800 kHz -3 dB |
| Input Voltage Noise | 28 nV/sqrt(Hz) at 1 kHz | — |
| Supply Voltage Range | 9 V to 36 V total (dual or single supply) | [DATA_NEEDED: supply voltage range] |
| Corriente en reposo | 1 mA | — |
| Input Topology | Difet FET inputs with buffered guard drive | — |
| Guard Drive Pins | Yes (buffered, adjacent to both inputs) | — |
| Input Overvoltage Protection | Yes (internal) | — |
| Encapsulado | 16-SOIC (0.295 in, 7.50 mm width) | 16-pin SOIC |
| Tipo de montaje | Surface Mount | Surface mount |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Product Type | — | Ultra-low-input-bias-current instrumentation amplifier |
| Input Bias Current at 25°C | — | 3 fA typical |
| Input Bias Current at 85°C | — | 25 fA typical |
| Gain Setting Method | — | 1 external resistor |
| Internal Topology | — | 3-op-amp instrumentation amplifier |
| Input Stage | — | Monolithic FET input |
| Slew Rate | — | 0.8 V/µs |
| Number of Circuits | — | 1 circuit |
| Differential Input | — | Yes |
| Input Guarding | — | Special input guarding techniques |
| Package Code | — | UA |
| Temperature Grade | — | Industrial |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Rango de tensión de salida | — | [DATA_NEEDED: output voltage range] |
| REACH Status | — | [DATA_NEEDED: REACH compliance] |