INA128P vs INA2128P Comparison
Detailed side-by-side comparison of INA128P by Texas Instruments and INA2128P by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | INA128P | INA2128P |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Precision instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | — |
| Common-Mode Rejection Ratio | 130 dB minimum | — |
| Offset Voltage | 50 µV maximum | — |
| Offset Voltage Drift | 0.5 µV/°C maximum | — |
| Input Bias Current | 5 nA maximum | 5 nA maximum |
| Input Protection | ±40 V | — |
| Supply Voltage Range | ±2.25 V to ±18 V | plus or minus 18 V |
| Quiescent Current | 700 µA | — |
| Bandwidth | 1.3 MHz | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Slew Rate | 4 V/µs | — |
| Package | 8-pin plastic DIP (PDIP) | 16-pin PDIP (SOL-16) |
| Operating Temperature | -40 °C to +85 °C | — |
| Input Type | Differential input | — |
| Manufacturer | Texas Instruments | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Amplifier Configuration | — | Dual instrumentation amplifier |
| Number of Amplifier Circuits | — | 2 circuits |
| Internal Architecture | — | 3-op-amp instrumentation amplifier |
| Gain Range | — | 1 to 10,000 |
| Gain Setting | — | 1 external resistor |
| Input Offset Voltage | — | 50 uV maximum |
| Input Offset Drift | — | 0.5 uV/degree C maximum |
| Common-Mode Rejection | — | 120 dB minimum |
| Input Protection Range | — | plus or minus 40 V |
| Input Circuitry | — | Current feedback |
| Power Class | — | Low power |
| Mounting Type | — | Through-hole |
| Operating Temperature Range | — | [DATA_NEEDED: operating temperature range] |
| Quiescent Current per Amplifier | — | [DATA_NEEDED: quiescent current per amplifier] |
| Maximum Supply Voltage | — | [DATA_NEEDED: maximum supply voltage] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| Output Swing Range | — | [DATA_NEEDED: output swing range] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |