INA128P vs INA2128P Perbandingan
Perbandingan bersamaan detil INA128P dari Texas Instruments dan INA2128P dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | INA128P | INA2128P |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Precision instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | — |
| Common-Mode Rejection Ratio | 130 dB minimum | — |
| Offset Voltage | 50 µV maximum | — |
| Offset Voltage Drift | 0.5 µV/°C maximum | — |
| Input Bias Current | 5 nA maximum | 5 nA maximum |
| Input Protection | ±40 V | — |
| Supply Voltage Range | ±2.25 V to ±18 V | plus or minus 18 V |
| Arus Memerintah | 700 µA | — |
| Bandwidth | 1.3 MHz | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Slew Rate | 4 V/µs | — |
| Paket | 8-pin plastic DIP (PDIP) | 16-pin PDIP (SOL-16) |
| Suhu Kerja | -40 °C to +85 °C | — |
| Input Type | Differential input | — |
| Manufacturer | Texas Instruments | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Amplifier Configuration | — | Dual instrumentation amplifier |
| Number of Amplifier Circuits | — | 2 circuits |
| Internal Architecture | — | 3-op-amp instrumentation amplifier |
| Gain Range | — | 1 to 10,000 |
| Gain Setting | — | 1 external resistor |
| Input Offset Voltage | — | 50 uV maximum |
| Input Offset Drift | — | 0.5 uV/degree C maximum |
| Common-Mode Rejection | — | 120 dB minimum |
| Input Protection Range | — | plus or minus 40 V |
| Input Circuitry | — | Current feedback |
| Power Class | — | Low power |
| Tipe Mounting | — | Through-hole |
| Rentang Suhu Kerja | — | [DATA_NEEDED: operating temperature range] |
| Quiescent Current per Amplifier | — | [DATA_NEEDED: quiescent current per amplifier] |
| Maximum Supply Voltage | — | [DATA_NEEDED: maximum supply voltage] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| Output Swing Range | — | [DATA_NEEDED: output swing range] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |