INA128P vs INA2128P Сравнение
Подробное сравнение бок о бок INA128P от Texas Instruments и INA2128P от Texas Instruments. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Сравнение характеристик
| Параметр | INA128P | INA2128P |
|---|---|---|
| Бренд | Texas Instruments | Texas Instruments |
| Категория | Amplifier ICs | Amplifier ICs |
| Статус жизненного цикла | Активен | Активен |
| Product Type | Precision instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | — |
| Common-Mode Rejection Ratio | 130 dB minimum | — |
| Offset Voltage | 50 µV maximum | — |
| Offset Voltage Drift | 0.5 µV/°C maximum | — |
| Input Bias Current | 5 nA maximum | 5 nA maximum |
| Input Protection | ±40 V | — |
| Supply Voltage Range | ±2.25 V to ±18 V | plus or minus 18 V |
| Ток покоя | 700 µA | — |
| Bandwidth | 1.3 MHz | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Slew Rate | 4 V/µs | — |
| Корпус | 8-pin plastic DIP (PDIP) | 16-pin PDIP (SOL-16) |
| Рабочая температура | -40 °C to +85 °C | — |
| Input Type | Differential input | — |
| Manufacturer | Texas Instruments | — |
| Статус RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Amplifier Configuration | — | Dual instrumentation amplifier |
| Number of Amplifier Circuits | — | 2 circuits |
| Internal Architecture | — | 3-op-amp instrumentation amplifier |
| Gain Range | — | 1 to 10,000 |
| Gain Setting | — | 1 external resistor |
| Input Offset Voltage | — | 50 uV maximum |
| Input Offset Drift | — | 0.5 uV/degree C maximum |
| Common-Mode Rejection | — | 120 dB minimum |
| Input Protection Range | — | plus or minus 40 V |
| Input Circuitry | — | Current feedback |
| Power Class | — | Low power |
| Тип монтажа | — | Through-hole |
| Диапазон рабочих температур | — | [DATA_NEEDED: operating temperature range] |
| Quiescent Current per Amplifier | — | [DATA_NEEDED: quiescent current per amplifier] |
| Maximum Supply Voltage | — | [DATA_NEEDED: maximum supply voltage] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| Output Swing Range | — | [DATA_NEEDED: output swing range] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |