INA128P vs INA2128P तुलना
विस्तृत दोनों ओर की तुलना INA128P द्वारा Texas Instruments और INA2128P द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | INA128P | INA2128P |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Precision instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | — |
| Common-Mode Rejection Ratio | 130 dB minimum | — |
| Offset Voltage | 50 µV maximum | — |
| Offset Voltage Drift | 0.5 µV/°C maximum | — |
| Input Bias Current | 5 nA maximum | 5 nA maximum |
| Input Protection | ±40 V | — |
| Supply Voltage Range | ±2.25 V to ±18 V | plus or minus 18 V |
| क्वाइसेंट करंट | 700 µA | — |
| Bandwidth | 1.3 MHz | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Slew Rate | 4 V/µs | — |
| पैकेज | 8-pin plastic DIP (PDIP) | 16-pin PDIP (SOL-16) |
| ऑपरेटिंग तापमान | -40 °C to +85 °C | — |
| Input Type | Differential input | — |
| Manufacturer | Texas Instruments | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Amplifier Configuration | — | Dual instrumentation amplifier |
| Number of Amplifier Circuits | — | 2 circuits |
| Internal Architecture | — | 3-op-amp instrumentation amplifier |
| Gain Range | — | 1 to 10,000 |
| Gain Setting | — | 1 external resistor |
| Input Offset Voltage | — | 50 uV maximum |
| Input Offset Drift | — | 0.5 uV/degree C maximum |
| Common-Mode Rejection | — | 120 dB minimum |
| Input Protection Range | — | plus or minus 40 V |
| Input Circuitry | — | Current feedback |
| Power Class | — | Low power |
| माउंटिंग प्रकार | — | Through-hole |
| ऑपरेटिंग तापमान रेंज | — | [DATA_NEEDED: operating temperature range] |
| Quiescent Current per Amplifier | — | [DATA_NEEDED: quiescent current per amplifier] |
| Maximum Supply Voltage | — | [DATA_NEEDED: maximum supply voltage] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| Output Swing Range | — | [DATA_NEEDED: output swing range] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |