INA141UA vs INA157U Comparison
Detailed side-by-side comparison of INA141UA by Texas Instruments and INA157U by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA157U - 3MHz Precision Difference Amplifier | Texas Instruments
INA157U ✓ ActiveSpecification Comparison
| Parameter | INA141UA | INA157U |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Instrumentation amplifier | — |
| Architecture | Three-op-amp design | — |
| Number of Circuits | 1 circuit | — |
| Selectable Gain | 10 V/V or 100 V/V | — |
| Bandwidth at G=100 | 200 kHz | — |
| Maximum Input Offset Voltage | 50 µV | — |
| Maximum Input Offset Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Minimum Common-Mode Rejection | 117 dB | — |
| Maximum Protected Input Voltage | ±40 V | — |
| Supply Voltage Range | ±18 V | [DATA_NEEDED: supply voltage range] |
| Quiescent Current | [DATA_NEEDED: numeric quiescent current] | — |
| Gain Accuracy | [DATA_NEEDED: numeric gain error and tolerance] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Voltage Range | [DATA_NEEDED: output voltage swing range] | — |
| Operating Temperature Range | [DATA_NEEDED: numeric operating temperature range] | -40°C to +85°C |
| Temperature Grade | Industrial | — |
| Package | 8-pin SOIC | 8-pin SOIC |
| Mounting Type | Surface mount | Surface mount |
| Terminal Count | 8 terminals | — |
| RoHS Status | [DATA_NEEDED: RoHS compliance status] | unknown |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Product Type | — | High-speed, precision difference amplifier |
| Bandwidth | — | 3 MHz |
| Maximum Offset Voltage | — | ±500 µV |
| Maximum Offset Drift | — | ±2 µV/°C |
| Maximum Gain Error | — | ±0.05% |
| Circuit Count | — | 1 circuit |
| Internal Resistor Network | — | Precision, ratio-matched, laser-trimmed |
| Internal Resistor Absolute Tolerance | — | ±20% |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Offset Current | — | [DATA_NEEDED: input offset current] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Input Noise | — | [DATA_NEEDED: input voltage noise] |