INA141UA vs INA157U Perbandingan
Perbandingan bersamaan detil INA141UA dari Texas Instruments dan INA157U dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | INA141UA | INA157U |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | Instrumentation amplifier | — |
| Architecture | Three-op-amp design | — |
| Number of Circuits | 1 circuit | — |
| Selectable Gain | 10 V/V or 100 V/V | — |
| Bandwidth at G=100 | 200 kHz | — |
| Maximum Input Offset Voltage | 50 µV | — |
| Maximum Input Offset Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Minimum Common-Mode Rejection | 117 dB | — |
| Maximum Protected Input Voltage | ±40 V | — |
| Supply Voltage Range | ±18 V | [DATA_NEEDED: supply voltage range] |
| Arus Memerintah | [DATA_NEEDED: numeric quiescent current] | — |
| Gain Accuracy | [DATA_NEEDED: numeric gain error and tolerance] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Rentang Tegangan Output | [DATA_NEEDED: output voltage swing range] | — |
| Rentang Suhu Kerja | [DATA_NEEDED: numeric operating temperature range] | -40°C to +85°C |
| Temperature Grade | Industrial | — |
| Paket | 8-pin SOIC | 8-pin SOIC |
| Tipe Mounting | Surface mount | Surface mount |
| Terminal Count | 8 terminals | — |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | unknown |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Product Type | — | High-speed, precision difference amplifier |
| Bandwidth | — | 3 MHz |
| Maximum Offset Voltage | — | ±500 µV |
| Maximum Offset Drift | — | ±2 µV/°C |
| Maximum Gain Error | — | ±0.05% |
| Circuit Count | — | 1 circuit |
| Internal Resistor Network | — | Precision, ratio-matched, laser-trimmed |
| Internal Resistor Absolute Tolerance | — | ±20% |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Offset Current | — | [DATA_NEEDED: input offset current] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Input Noise | — | [DATA_NEEDED: input voltage noise] |