INA141UA vs INA157U Comparaison
Comparaison détaillée côte à côte de INA141UA par Texas Instruments et INA157U par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | INA141UA | INA157U |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | Instrumentation amplifier | — |
| Architecture | Three-op-amp design | — |
| Number of Circuits | 1 circuit | — |
| Selectable Gain | 10 V/V or 100 V/V | — |
| Bandwidth at G=100 | 200 kHz | — |
| Maximum Input Offset Voltage | 50 µV | — |
| Maximum Input Offset Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Minimum Common-Mode Rejection | 117 dB | — |
| Maximum Protected Input Voltage | ±40 V | — |
| Supply Voltage Range | ±18 V | [DATA_NEEDED: supply voltage range] |
| Courant de repos | [DATA_NEEDED: numeric quiescent current] | — |
| Gain Accuracy | [DATA_NEEDED: numeric gain error and tolerance] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Plage de tension de sortie | [DATA_NEEDED: output voltage swing range] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: numeric operating temperature range] | -40°C to +85°C |
| Temperature Grade | Industrial | — |
| Boîtier | 8-pin SOIC | 8-pin SOIC |
| Type de montage | Surface mount | Surface mount |
| Terminal Count | 8 terminals | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | unknown |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Product Type | — | High-speed, precision difference amplifier |
| Bandwidth | — | 3 MHz |
| Maximum Offset Voltage | — | ±500 µV |
| Maximum Offset Drift | — | ±2 µV/°C |
| Maximum Gain Error | — | ±0.05% |
| Circuit Count | — | 1 circuit |
| Internal Resistor Network | — | Precision, ratio-matched, laser-trimmed |
| Internal Resistor Absolute Tolerance | — | ±20% |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Offset Current | — | [DATA_NEEDED: input offset current] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Input Noise | — | [DATA_NEEDED: input voltage noise] |