INA141UA vs INA157U Karşılaştırma
Ayrıntılı yan yana karşılaştırma INA141UA tarafından Texas Instruments ve INA157U tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | INA141UA | INA157U |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Type | Instrumentation amplifier | — |
| Architecture | Three-op-amp design | — |
| Number of Circuits | 1 circuit | — |
| Selectable Gain | 10 V/V or 100 V/V | — |
| Bandwidth at G=100 | 200 kHz | — |
| Maximum Input Offset Voltage | 50 µV | — |
| Maximum Input Offset Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Minimum Common-Mode Rejection | 117 dB | — |
| Maximum Protected Input Voltage | ±40 V | — |
| Supply Voltage Range | ±18 V | [DATA_NEEDED: supply voltage range] |
| Durağan Akım | [DATA_NEEDED: numeric quiescent current] | — |
| Gain Accuracy | [DATA_NEEDED: numeric gain error and tolerance] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Çıkış Gerilimi Aralığı | [DATA_NEEDED: output voltage swing range] | — |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: numeric operating temperature range] | -40°C to +85°C |
| Temperature Grade | Industrial | — |
| Paket | 8-pin SOIC | 8-pin SOIC |
| Montaj Türü | Surface mount | Surface mount |
| Terminal Count | 8 terminals | — |
| RoHS Durumu | [DATA_NEEDED: RoHS compliance status] | unknown |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Product Type | — | High-speed, precision difference amplifier |
| Bandwidth | — | 3 MHz |
| Maximum Offset Voltage | — | ±500 µV |
| Maximum Offset Drift | — | ±2 µV/°C |
| Maximum Gain Error | — | ±0.05% |
| Circuit Count | — | 1 circuit |
| Internal Resistor Network | — | Precision, ratio-matched, laser-trimmed |
| Internal Resistor Absolute Tolerance | — | ±20% |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Offset Current | — | [DATA_NEEDED: input offset current] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Input Noise | — | [DATA_NEEDED: input voltage noise] |