INA2126U vs INA2126UG4 Comparison

Detailed side-by-side comparison of INA2126U by Texas Instruments and INA2126UG4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Texas Instruments
INA2126UG4 INA2126UG4 - 36V Dual Micropower Instrumentation Amplifier | TI

INA2126UG4 - 36V Dual Micropower Instrumentation Amplifier | TI

INA2126UG4 ✓ Active

Specification Comparison

Parameter INA2126U INA2126UG4
Brand Texas Instruments Texas Instruments
Category Amplifier ICs Amplifier ICs
Lifecycle Status Active Active
Amplifier Type Dual precision instrumentation amplifier —
Number of Channels 2 channels —
Maximum Total Supply Voltage 36 V —
Operating Supply Range ±1.35 V to ±18 V —
Minimum Total Supply Voltage 2.7 V —
Quiescent Current per Channel 175 µA —
Maximum Input Offset Voltage 250 µV —
Minimum Voltage Gain 5 V/V —
Maximum Voltage Gain 10000 V/V —
Typical Gain-Bandwidth Product 200 kHz —
Typical Input Noise Density at 1 kHz 0.4 nV/√Hz —
Internal Architecture Two-op-amp instrumentation amplifier —
Package 16-pin SOIC 16-pin SOIC, 3.90 mm width
Mounting Type Surface mount Surface mount
Operating Temperature Range [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Input Bias Current [DATA_NEEDED: input bias current] —
Common-Mode Rejection Ratio [DATA_NEEDED: common-mode rejection ratio] —
Slew Rate [DATA_NEEDED: slew rate] [DATA_NEEDED: slew rate]
RoHS Status [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Device Type — Dual precision instrumentation amplifier
Channel Count — 2 channels
Maximum Supply Voltage — 36 V
Supply Voltage Range — ±1.35 V to ±18 V
Single-Supply Minimum — 2.7 V
Quiescent Current — 175 µA per channel
Offset Voltage — 250 µV
Architecture — Two-op-amp instrumentation-amplifier design
Input Type — Differential
Signal Type — Low-level differential-signal acquisition
Gain Settings — [DATA_NEEDED: available gain settings]
Input Common-Mode Range — [DATA_NEEDED: input common-mode range]
Output Voltage Range — [DATA_NEEDED: output voltage range]
Gain Error — [DATA_NEEDED: gain error]
Noise Performance — [DATA_NEEDED: input noise density]
Bandwidth — [DATA_NEEDED: signal bandwidth]

Datasheets & Resources

Browse All Products Create BOM Request Quote