INA2126U vs INA2126UG4 比較
詳細な並列比較: INA2126U メーカー: Texas Instruments および INA2126UG4 メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
INA2126U - 36V Dual Micropower Instrumentation Amplifier | Texas Instruments
INA2126U ✓ 生産中仕様比較
| パラメータ | INA2126U | INA2126UG4 |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Amplifier Type | Dual precision instrumentation amplifier | — |
| Number of Channels | 2 channels | — |
| Maximum Total Supply Voltage | 36 V | — |
| Operating Supply Range | ±1.35 V to ±18 V | — |
| Minimum Total Supply Voltage | 2.7 V | — |
| Quiescent Current per Channel | 175 µA | — |
| Maximum Input Offset Voltage | 250 µV | — |
| Minimum Voltage Gain | 5 V/V | — |
| Maximum Voltage Gain | 10000 V/V | — |
| Typical Gain-Bandwidth Product | 200 kHz | — |
| Typical Input Noise Density at 1 kHz | 0.4 nV/√Hz | — |
| Internal Architecture | Two-op-amp instrumentation amplifier | — |
| パッケージ | 16-pin SOIC | 16-pin SOIC, 3.90 mm width |
| 実装タイプ | Surface mount | Surface mount |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Device Type | — | Dual precision instrumentation amplifier |
| Channel Count | — | 2 channels |
| Maximum Supply Voltage | — | 36 V |
| Supply Voltage Range | — | ±1.35 V to ±18 V |
| Single-Supply Minimum | — | 2.7 V |
| 静止電流 | — | 175 µA per channel |
| Offset Voltage | — | 250 µV |
| Architecture | — | Two-op-amp instrumentation-amplifier design |
| Input Type | — | Differential |
| Signal Type | — | Low-level differential-signal acquisition |
| Gain Settings | — | [DATA_NEEDED: available gain settings] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| 出力電圧範囲 | — | [DATA_NEEDED: output voltage range] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| Noise Performance | — | [DATA_NEEDED: input noise density] |
| Bandwidth | — | [DATA_NEEDED: signal bandwidth] |