ISO1430DWR vs ISO1432DWR Comparison
Detailed side-by-side comparison of ISO1430DWR by Texas Instruments and ISO1432DWR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
ISO1432DWR - 12Mbps Isolated Full-Duplex RS-485/RS-422 Transceiver | TI (Tape & Reel)
ISO1432DWR ✓ ActiveSpecification Comparison
| Parameter | ISO1430DWR | ISO1432DWR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Drivers, Receivers, Transceivers |
| Lifecycle Status | Active | Active |
| Product Type | Galvanically isolated half-duplex RS-485 and RS-422 transceiver | — |
| Maximum Data Rate | 12 Mbps | — |
| Isolation Rating | 5 kVrms | — |
| Transceiver Configuration | 1 transmitter and 1 receiver | — |
| Duplex Mode | Half-duplex | — |
| EMC Protection | Protected against ESD and EFT bus events | — |
| Interface Standards | TIA/EIA RS-485 and RS-422 | — |
| Operating Temperature Range | -40°C to +125°C | — |
| Package | 16-pin SOIC (DW) | 16-pin SOIC (DW) |
| Mounting Type | Surface mount | Surface Mount |
| Logic Supply Voltage | [DATA_NEEDED: logic-side supply voltage] | — |
| Bus-side Supply Voltage | [DATA_NEEDED: bus-side supply voltage] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Common-Mode Transient Immunity | [DATA_NEEDED: common-mode transient immunity] | [DATA_NEEDED: CMTI value] |
| ESD Protection Rating | [DATA_NEEDED: ESD protection rating] | — |
| EFT Protection Rating | [DATA_NEEDED: EFT protection rating] | — |
| Isolation Capacitance | [DATA_NEEDED: isolation capacitance] | — |
| Lead Finish | [DATA_NEEDED: lead finish] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Function | — | Transceiver, Isolated |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Full |
| Data Rate (max) | — | 12 Mbps |
| Isolation Voltage | — | 5000 Vrms (reinforced) |
| Supply Voltage (Vcc1, Vcc2) | — | 3 V to 5.5 V |
| Operating Temperature | — | -40 °C to +125 °C |
| Receiver Hysteresis | — | [DATA_NEEDED: typical value] |
| Bus Pin ESD (HBM) | — | [DATA_NEEDED: HBM rating] |
| UL Recognition | — | UL 1577 recognized |
| Lead-Free | — | Yes |
| MSL Level | — | [DATA_NEEDED: MSL rating] |