ISO1430DWR vs ISO1432DWR Comparação
Comparação detalhada lado a lado de ISO1430DWR por Texas Instruments e ISO1432DWR por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Texas Instruments
ISO1432DWR - 12Mbps Isolated Full-Duplex RS-485/RS-422 Transceiver | TI (Tape & Reel)
ISO1432DWR ✓ AtivoComparação de especificações
| Parâmetro | ISO1430DWR | ISO1432DWR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoria | Interface ICs | Drivers, Receivers, Transceivers |
| Status do ciclo de vida | Ativo | Ativo |
| Product Type | Galvanically isolated half-duplex RS-485 and RS-422 transceiver | — |
| Maximum Data Rate | 12 Mbps | — |
| Isolation Rating | 5 kVrms | — |
| Transceiver Configuration | 1 transmitter and 1 receiver | — |
| Duplex Mode | Half-duplex | — |
| EMC Protection | Protected against ESD and EFT bus events | — |
| Interface Standards | TIA/EIA RS-485 and RS-422 | — |
| Faixa de temperatura de operação | -40°C to +125°C | — |
| Encapsulamento | 16-pin SOIC (DW) | 16-pin SOIC (DW) |
| Tipo de montagem | Surface mount | Surface Mount |
| Logic Supply Voltage | [DATA_NEEDED: logic-side supply voltage] | — |
| Bus-side Supply Voltage | [DATA_NEEDED: bus-side supply voltage] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Common-Mode Transient Immunity | [DATA_NEEDED: common-mode transient immunity] | [DATA_NEEDED: CMTI value] |
| ESD Protection Rating | [DATA_NEEDED: ESD protection rating] | — |
| EFT Protection Rating | [DATA_NEEDED: EFT protection rating] | — |
| Isolation Capacitance | [DATA_NEEDED: isolation capacitance] | — |
| Lead Finish | [DATA_NEEDED: lead finish] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Função | — | Transceiver, Isolated |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Full |
| Data Rate (max) | — | 12 Mbps |
| Isolation Voltage | — | 5000 Vrms (reinforced) |
| Supply Voltage (Vcc1, Vcc2) | — | 3 V to 5.5 V |
| Temperatura de operação | — | -40 °C to +125 °C |
| Receiver Hysteresis | — | [DATA_NEEDED: typical value] |
| Bus Pin ESD (HBM) | — | [DATA_NEEDED: HBM rating] |
| UL Recognition | — | UL 1577 recognized |
| Lead-Free | — | Yes |
| Nível MSL | — | [DATA_NEEDED: MSL rating] |