ISO1430DWR vs ISO1432DWR Comparaison
Comparaison détaillée côte à côte de ISO1430DWR par Texas Instruments et ISO1432DWR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
ISO1432DWR - 12Mbps Isolated Full-Duplex RS-485/RS-422 Transceiver | TI (Tape & Reel)
ISO1432DWR ✓ ActifComparaison des spécifications
| Paramètre | ISO1430DWR | ISO1432DWR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Drivers, Receivers, Transceivers |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Galvanically isolated half-duplex RS-485 and RS-422 transceiver | — |
| Maximum Data Rate | 12 Mbps | — |
| Isolation Rating | 5 kVrms | — |
| Transceiver Configuration | 1 transmitter and 1 receiver | — |
| Duplex Mode | Half-duplex | — |
| EMC Protection | Protected against ESD and EFT bus events | — |
| Interface Standards | TIA/EIA RS-485 and RS-422 | — |
| Plage de température de fonctionnement | -40°C to +125°C | — |
| Boîtier | 16-pin SOIC (DW) | 16-pin SOIC (DW) |
| Type de montage | Surface mount | Surface Mount |
| Logic Supply Voltage | [DATA_NEEDED: logic-side supply voltage] | — |
| Bus-side Supply Voltage | [DATA_NEEDED: bus-side supply voltage] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Common-Mode Transient Immunity | [DATA_NEEDED: common-mode transient immunity] | [DATA_NEEDED: CMTI value] |
| ESD Protection Rating | [DATA_NEEDED: ESD protection rating] | — |
| EFT Protection Rating | [DATA_NEEDED: EFT protection rating] | — |
| Isolation Capacitance | [DATA_NEEDED: isolation capacitance] | — |
| Lead Finish | [DATA_NEEDED: lead finish] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Fonction | — | Transceiver, Isolated |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Full |
| Data Rate (max) | — | 12 Mbps |
| Isolation Voltage | — | 5000 Vrms (reinforced) |
| Supply Voltage (Vcc1, Vcc2) | — | 3 V to 5.5 V |
| Température de fonctionnement | — | -40 °C to +125 °C |
| Receiver Hysteresis | — | [DATA_NEEDED: typical value] |
| Bus Pin ESD (HBM) | — | [DATA_NEEDED: HBM rating] |
| UL Recognition | — | UL 1577 recognized |
| Lead-Free | — | Yes |
| Niveau MSL | — | [DATA_NEEDED: MSL rating] |