ISO1430DWR vs ISO1432DWR Vergleich
Detaillierter Direktvergleich von ISO1430DWR von Texas Instruments und ISO1432DWR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
ISO1432DWR - 12Mbps Isolated Full-Duplex RS-485/RS-422 Transceiver | TI (Tape & Reel)
ISO1432DWR ✓ AktivSpezifikationsvergleich
| Parameter | ISO1430DWR | ISO1432DWR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Drivers, Receivers, Transceivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Galvanically isolated half-duplex RS-485 and RS-422 transceiver | — |
| Maximum Data Rate | 12 Mbps | — |
| Isolation Rating | 5 kVrms | — |
| Transceiver Configuration | 1 transmitter and 1 receiver | — |
| Duplex Mode | Half-duplex | — |
| EMC Protection | Protected against ESD and EFT bus events | — |
| Interface Standards | TIA/EIA RS-485 and RS-422 | — |
| Betriebstemperaturbereich | -40°C to +125°C | — |
| Gehäuse | 16-pin SOIC (DW) | 16-pin SOIC (DW) |
| Montageart | Surface mount | Surface Mount |
| Logic Supply Voltage | [DATA_NEEDED: logic-side supply voltage] | — |
| Bus-side Supply Voltage | [DATA_NEEDED: bus-side supply voltage] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Common-Mode Transient Immunity | [DATA_NEEDED: common-mode transient immunity] | [DATA_NEEDED: CMTI value] |
| ESD Protection Rating | [DATA_NEEDED: ESD protection rating] | — |
| EFT Protection Rating | [DATA_NEEDED: EFT protection rating] | — |
| Isolation Capacitance | [DATA_NEEDED: isolation capacitance] | — |
| Lead Finish | [DATA_NEEDED: lead finish] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Funktion | — | Transceiver, Isolated |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Full |
| Data Rate (max) | — | 12 Mbps |
| Isolation Voltage | — | 5000 Vrms (reinforced) |
| Supply Voltage (Vcc1, Vcc2) | — | 3 V to 5.5 V |
| Betriebstemperatur | — | -40 °C to +125 °C |
| Receiver Hysteresis | — | [DATA_NEEDED: typical value] |
| Bus Pin ESD (HBM) | — | [DATA_NEEDED: HBM rating] |
| UL Recognition | — | UL 1577 recognized |
| Lead-Free | — | Yes |
| MSL-Level | — | [DATA_NEEDED: MSL rating] |