ITS4075QEPDXUMA1 vs ISP752TFUMA1 Comparison
Detailed side-by-side comparison of ITS4075QEPDXUMA1 by Infineon and ISP752TFUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | ITS4075QEPDXUMA1 | ISP752TFUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Part Number | ITS4075QEPDXUMA1 | — |
| Part Family | ITS4075Q-EP-D (PROFET Industrial) | — |
| Function | Quad-channel smart high-side power switch / load driver | — |
| Number of Channels | 4 | — |
| Typical On-State Resistance (RDS(ON)) | 75 mΩ (datasheet headline) / 120 mΩ typical at Tj = 125 °C | — |
| Maximum Load Current per Channel | 2.6 A | — |
| Operating Supply Voltage | [DATA_NEEDED: nominal supply range minimum and maximum] | 6 V to 52 V |
| Maximum Supply Voltage | 45 V | — |
| On-State Resistance Max (per channel) | [DATA_NEEDED: maximum RDS(ON) spec at 25 °C] | — |
| Operating Temperature Range | -40 °C to +150 °C | — |
| Junction Temperature Maximum | +150 °C | — |
| Switch Type | High-side, N-channel MOSFET with charge pump | — |
| Diagnostic Feedback | Current proportional sense (IS pin) per channel | — |
| Protection Features | Overcurrent, short-circuit, over-temperature, overvoltage, undervoltage lockout | — |
| Integrated Charge Pump | Yes | — |
| Reverse Polarity Protection | Requires external 150 Ω resistor or reverse diode (per datasheet) | — |
| Package | PG-TSDSO-14 (14-pin TSSOP with exposed pad) | — |
| Mounting Type | Surface Mount | Surface Mount |
| RoHS Status | Compliant | Compliant |
| MSL Level | [DATA_NEEDED: MSL rating] | — |
| Lead-Free | Yes | — |
| Product Type | — | Smart High-Side Power Switch |
| Series | — | PROFET™ Industrial |
| Switch Configuration | — | 1:1 (Single channel) |
| Output Configuration | — | High-Side |
| Output Type | — | N-Channel |
| On-Resistance (Ron) | — | 200 mOhm |
| Continuous Load Current | — | 1.3 A |
| Input Type | — | Non-Inverting (logic-level) |
| Operating Temperature | — | -30 C to +85 C |
| Package / Case | — | PG-DSO-8-24 (DSO-8 with exposed pad) |
| Fault Protection | — | Overcurrent; Short-Circuit; Overtemperature; Overvoltage (load-dump); Reverse voltage |
| Diagnostic Output | — | Status flag |