ITS4075QEPDXUMA1 vs ISP752TFUMA1 비교
다음의 상세 나란히 비교: ITS4075QEPDXUMA1 제조: Infineon 및 ISP752TFUMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | ITS4075QEPDXUMA1 | ISP752TFUMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $2.45 | $1.02 |
| Part Number | ITS4075QEPDXUMA1 | — |
| Part Family | ITS4075Q-EP-D (PROFET Industrial) | — |
| 기능 | Quad-channel smart high-side power switch / load driver | — |
| Number of Channels | 4 | — |
| Typical On-State Resistance (RDS(ON)) | 75 mΩ (datasheet headline) / 120 mΩ typical at Tj = 125 °C | — |
| Maximum Load Current per Channel | 2.6 A | — |
| 동작 공급 전압 | [DATA_NEEDED: nominal supply range minimum and maximum] | 6 V to 52 V |
| Maximum Supply Voltage | 45 V | — |
| On-State Resistance Max (per channel) | [DATA_NEEDED: maximum RDS(ON) spec at 25 °C] | — |
| 동작 온도 범위 | -40 °C to +150 °C | — |
| Junction Temperature Maximum | +150 °C | — |
| Switch Type | High-side, N-channel MOSFET with charge pump | — |
| Diagnostic Feedback | Current proportional sense (IS pin) per channel | — |
| Protection Features | Overcurrent, short-circuit, over-temperature, overvoltage, undervoltage lockout | — |
| Integrated Charge Pump | Yes | — |
| Reverse Polarity Protection | Requires external 150 Ω resistor or reverse diode (per datasheet) | — |
| 패키지 | PG-TSDSO-14 (14-pin TSSOP with exposed pad) | — |
| 실장 유형 | Surface Mount | Surface Mount |
| RoHS 상태 | Compliant | Compliant |
| MSL 레벨 | [DATA_NEEDED: MSL rating] | — |
| Lead-Free | Yes | — |
| Product Type | — | Smart High-Side Power Switch |
| Series | — | PROFET™ Industrial |
| Switch Configuration | — | 1:1 (Single channel) |
| 출력 구성 | — | High-Side |
| 출력 유형 | — | N-Channel |
| On-Resistance (Ron) | — | 200 mOhm |
| Continuous Load Current | — | 1.3 A |
| Input Type | — | Non-Inverting (logic-level) |
| 동작 온도 | — | -30 C to +85 C |
| 패키지 / 케이스 | — | PG-DSO-8-24 (DSO-8 with exposed pad) |
| Fault Protection | — | Overcurrent; Short-Circuit; Overtemperature; Overvoltage (load-dump); Reverse voltage |
| Diagnostic Output | — | Status flag |