ITS4075QEPDXUMA1 vs ISP752TFUMA1 Comparaison
Comparaison détaillée côte à côte de ITS4075QEPDXUMA1 par Infineon et ISP752TFUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | ITS4075QEPDXUMA1 | ISP752TFUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,45 | $1,02 |
| Part Number | ITS4075QEPDXUMA1 | — |
| Part Family | ITS4075Q-EP-D (PROFET Industrial) | — |
| Fonction | Quad-channel smart high-side power switch / load driver | — |
| Number of Channels | 4 | — |
| Typical On-State Resistance (RDS(ON)) | 75 mΩ (datasheet headline) / 120 mΩ typical at Tj = 125 °C | — |
| Maximum Load Current per Channel | 2.6 A | — |
| Tension d'alimentation de fonctionnement | [DATA_NEEDED: nominal supply range minimum and maximum] | 6 V to 52 V |
| Maximum Supply Voltage | 45 V | — |
| On-State Resistance Max (per channel) | [DATA_NEEDED: maximum RDS(ON) spec at 25 °C] | — |
| Plage de température de fonctionnement | -40 °C to +150 °C | — |
| Junction Temperature Maximum | +150 °C | — |
| Switch Type | High-side, N-channel MOSFET with charge pump | — |
| Diagnostic Feedback | Current proportional sense (IS pin) per channel | — |
| Protection Features | Overcurrent, short-circuit, over-temperature, overvoltage, undervoltage lockout | — |
| Integrated Charge Pump | Yes | — |
| Reverse Polarity Protection | Requires external 150 Ω resistor or reverse diode (per datasheet) | — |
| Boîtier | PG-TSDSO-14 (14-pin TSSOP with exposed pad) | — |
| Type de montage | Surface Mount | Surface Mount |
| Statut RoHS | Compliant | Compliant |
| Niveau MSL | [DATA_NEEDED: MSL rating] | — |
| Lead-Free | Yes | — |
| Product Type | — | Smart High-Side Power Switch |
| Series | — | PROFET™ Industrial |
| Switch Configuration | — | 1:1 (Single channel) |
| Configuration de sortie | — | High-Side |
| Type de sortie | — | N-Channel |
| On-Resistance (Ron) | — | 200 mOhm |
| Continuous Load Current | — | 1.3 A |
| Input Type | — | Non-Inverting (logic-level) |
| Température de fonctionnement | — | -30 C to +85 C |
| Boîtier / Format | — | PG-DSO-8-24 (DSO-8 with exposed pad) |
| Fault Protection | — | Overcurrent; Short-Circuit; Overtemperature; Overvoltage (load-dump); Reverse voltage |
| Diagnostic Output | — | Status flag |