ITS4075QEPDXUMA1 vs ISP752TFUMA1 Comparação
Comparação detalhada lado a lado de ITS4075QEPDXUMA1 por Infineon e ISP752TFUMA1 por Infineon. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | ITS4075QEPDXUMA1 | ISP752TFUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoria | Power MOSFET Drivers | Power MOSFET Drivers |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $2,45 | $1,02 |
| Part Number | ITS4075QEPDXUMA1 | — |
| Part Family | ITS4075Q-EP-D (PROFET Industrial) | — |
| Função | Quad-channel smart high-side power switch / load driver | — |
| Number of Channels | 4 | — |
| Typical On-State Resistance (RDS(ON)) | 75 mΩ (datasheet headline) / 120 mΩ typical at Tj = 125 °C | — |
| Maximum Load Current per Channel | 2.6 A | — |
| Tensão de alimentação de operação | [DATA_NEEDED: nominal supply range minimum and maximum] | 6 V to 52 V |
| Maximum Supply Voltage | 45 V | — |
| On-State Resistance Max (per channel) | [DATA_NEEDED: maximum RDS(ON) spec at 25 °C] | — |
| Faixa de temperatura de operação | -40 °C to +150 °C | — |
| Junction Temperature Maximum | +150 °C | — |
| Switch Type | High-side, N-channel MOSFET with charge pump | — |
| Diagnostic Feedback | Current proportional sense (IS pin) per channel | — |
| Protection Features | Overcurrent, short-circuit, over-temperature, overvoltage, undervoltage lockout | — |
| Integrated Charge Pump | Yes | — |
| Reverse Polarity Protection | Requires external 150 Ω resistor or reverse diode (per datasheet) | — |
| Encapsulamento | PG-TSDSO-14 (14-pin TSSOP with exposed pad) | — |
| Tipo de montagem | Surface Mount | Surface Mount |
| Status RoHS | Compliant | Compliant |
| Nível MSL | [DATA_NEEDED: MSL rating] | — |
| Lead-Free | Yes | — |
| Product Type | — | Smart High-Side Power Switch |
| Series | — | PROFET™ Industrial |
| Switch Configuration | — | 1:1 (Single channel) |
| Configuração de saída | — | High-Side |
| Tipo de saída | — | N-Channel |
| On-Resistance (Ron) | — | 200 mOhm |
| Continuous Load Current | — | 1.3 A |
| Input Type | — | Non-Inverting (logic-level) |
| Temperatura de operação | — | -30 C to +85 C |
| Encapsulamento / Caixa | — | PG-DSO-8-24 (DSO-8 with exposed pad) |
| Fault Protection | — | Overcurrent; Short-Circuit; Overtemperature; Overvoltage (load-dump); Reverse voltage |
| Diagnostic Output | — | Status flag |