ITS4090QEPDXUMA1 vs ITS4200SSJDXUMA1 Comparison
Detailed side-by-side comparison of ITS4090QEPDXUMA1 by Infineon and ITS4200SSJDXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | ITS4090QEPDXUMA1 | ITS4200SSJDXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power Distribution Switches | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Product Type | Quad-Channel Smart High-Side Power Switch | — |
| Family | PROFET (PROtected FET) 24V/48V | — |
| Number of Channels | 4 | — |
| Topology | High-Side Switch (N-Channel DMOS) | — |
| Typical RDS(ON) per Channel | 90 mΩ | — |
| RDS(ON) at Tj = 125 °C | 140 mΩ (typical) | — |
| Nominal Continuous Output Current per Channel | 750 mA | — |
| Minimum Current per Channel | 500 mA | — |
| Supply Voltage Range (Operating) | 4.5 V to 45 V | — |
| Supply Voltage Range (Absolute Maximum) | -0.3 V to 45 V | — |
| On-State Input Voltage (Logic High) | [DATA_NEEDED: VIH threshold] | — |
| Operating Temperature Range | -40 °C to +150 °C (Tj) | — |
| Diagnostic Feedback | Current-sense IS pin (analog proportional to load) | — |
| Protection Features | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) | Overload, current limit, short circuit, thermal shutdown with restart, overvoltage (load dump), undervoltage shutdown |
| Package | PG-TSDSO-14 (exposed pad) | PG-DSO-8 (DSO-8) |
| Mounting Type | Surface Mount | Surface Mount |
| PWM Capability | Up to 1 kHz (typical) | — |
| MSL Level | [DATA_NEEDED: MSL rating] | — |
| RoHS Status | Compliant | Compliant |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET (MINI-PROFET) |
| Switch Type | — | High-Side N-Channel, 1:1 |
| On-State Resistance (R_DS(on)) | — | 200 mOhm (typical) |
| Continuous Load Current | — | 1.2 A |
| Supply Voltage (Vbb) | — | 6 V to 52 V |
| Quiescent Current | — | 0.8 mA |
| Maximum Power Dissipation | — | 1400 mW |
| Operating Temperature | — | -40 C to +150 C |
| Output Configuration | — | Single high-side switch |
| Diagnostic Output | — | Status pin for fault feedback |
| Load Type | — | Resistive and inductive loads |