ITS4090QEPDXUMA1 vs ITS4200SSJDXUMA1 Vergleich
Detaillierter Direktvergleich von ITS4090QEPDXUMA1 von Infineon und ITS4200SSJDXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | ITS4090QEPDXUMA1 | ITS4200SSJDXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power Distribution Switches | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,62 | $0,98 |
| Product Type | Quad-Channel Smart High-Side Power Switch | — |
| Family | PROFET (PROtected FET) 24V/48V | — |
| Number of Channels | 4 | — |
| Topologie | High-Side Switch (N-Channel DMOS) | — |
| Typical RDS(ON) per Channel | 90 mΩ | — |
| RDS(ON) at Tj = 125 °C | 140 mΩ (typical) | — |
| Nominal Continuous Output Current per Channel | 750 mA | — |
| Minimum Current per Channel | 500 mA | — |
| Supply Voltage Range (Operating) | 4.5 V to 45 V | — |
| Supply Voltage Range (Absolute Maximum) | -0.3 V to 45 V | — |
| On-State Input Voltage (Logic High) | [DATA_NEEDED: VIH threshold] | — |
| Betriebstemperaturbereich | -40 °C to +150 °C (Tj) | — |
| Diagnostic Feedback | Current-sense IS pin (analog proportional to load) | — |
| Protection Features | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) | Overload, current limit, short circuit, thermal shutdown with restart, overvoltage (load dump), undervoltage shutdown |
| Gehäuse | PG-TSDSO-14 (exposed pad) | PG-DSO-8 (DSO-8) |
| Montageart | Surface Mount | Surface Mount |
| PWM Capability | Up to 1 kHz (typical) | — |
| MSL-Level | [DATA_NEEDED: MSL rating] | — |
| RoHS-Status | Compliant | Compliant |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET (MINI-PROFET) |
| Switch Type | — | High-Side N-Channel, 1:1 |
| On-State Resistance (R_DS(on)) | — | 200 mOhm (typical) |
| Continuous Load Current | — | 1.2 A |
| Supply Voltage (Vbb) | — | 6 V to 52 V |
| Ruhestrom | — | 0.8 mA |
| Maximum Power Dissipation | — | 1400 mW |
| Betriebstemperatur | — | -40 C to +150 C |
| Ausgangskonfiguration | — | Single high-side switch |
| Diagnostic Output | — | Status pin for fault feedback |
| Load Type | — | Resistive and inductive loads |