ITS4090QEPDXUMA1 vs ITS4200SSJDXUMA1 比較
詳細な並列比較: ITS4090QEPDXUMA1 メーカー: Infineon および ITS4200SSJDXUMA1 メーカー: Infineon。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | ITS4090QEPDXUMA1 | ITS4200SSJDXUMA1 |
|---|---|---|
| ブランド | Infineon | Infineon |
| カテゴリ | Power Distribution Switches | Power MOSFET Drivers |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $1.62 | $0.98 |
| Product Type | Quad-Channel Smart High-Side Power Switch | — |
| Family | PROFET (PROtected FET) 24V/48V | — |
| Number of Channels | 4 | — |
| トポロジー | High-Side Switch (N-Channel DMOS) | — |
| Typical RDS(ON) per Channel | 90 mΩ | — |
| RDS(ON) at Tj = 125 °C | 140 mΩ (typical) | — |
| Nominal Continuous Output Current per Channel | 750 mA | — |
| Minimum Current per Channel | 500 mA | — |
| Supply Voltage Range (Operating) | 4.5 V to 45 V | — |
| Supply Voltage Range (Absolute Maximum) | -0.3 V to 45 V | — |
| On-State Input Voltage (Logic High) | [DATA_NEEDED: VIH threshold] | — |
| 動作温度範囲 | -40 °C to +150 °C (Tj) | — |
| Diagnostic Feedback | Current-sense IS pin (analog proportional to load) | — |
| Protection Features | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) | Overload, current limit, short circuit, thermal shutdown with restart, overvoltage (load dump), undervoltage shutdown |
| パッケージ | PG-TSDSO-14 (exposed pad) | PG-DSO-8 (DSO-8) |
| 実装タイプ | Surface Mount | Surface Mount |
| PWM Capability | Up to 1 kHz (typical) | — |
| MSLレベル | [DATA_NEEDED: MSL rating] | — |
| RoHS ステータス | Compliant | Compliant |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET (MINI-PROFET) |
| Switch Type | — | High-Side N-Channel, 1:1 |
| On-State Resistance (R_DS(on)) | — | 200 mOhm (typical) |
| Continuous Load Current | — | 1.2 A |
| Supply Voltage (Vbb) | — | 6 V to 52 V |
| 静止電流 | — | 0.8 mA |
| Maximum Power Dissipation | — | 1400 mW |
| 動作温度 | — | -40 C to +150 C |
| 出力構成 | — | Single high-side switch |
| Diagnostic Output | — | Status pin for fault feedback |
| Load Type | — | Resistive and inductive loads |