ITS4090QEPDXUMA1 vs ITS4200SSJDXUMA1 Comparação
Comparação detalhada lado a lado de ITS4090QEPDXUMA1 por Infineon e ITS4200SSJDXUMA1 por Infineon. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | ITS4090QEPDXUMA1 | ITS4200SSJDXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoria | Power Distribution Switches | Power MOSFET Drivers |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $1,62 | $0,98 |
| Product Type | Quad-Channel Smart High-Side Power Switch | — |
| Family | PROFET (PROtected FET) 24V/48V | — |
| Number of Channels | 4 | — |
| Topologia | High-Side Switch (N-Channel DMOS) | — |
| Typical RDS(ON) per Channel | 90 mΩ | — |
| RDS(ON) at Tj = 125 °C | 140 mΩ (typical) | — |
| Nominal Continuous Output Current per Channel | 750 mA | — |
| Minimum Current per Channel | 500 mA | — |
| Supply Voltage Range (Operating) | 4.5 V to 45 V | — |
| Supply Voltage Range (Absolute Maximum) | -0.3 V to 45 V | — |
| On-State Input Voltage (Logic High) | [DATA_NEEDED: VIH threshold] | — |
| Faixa de temperatura de operação | -40 °C to +150 °C (Tj) | — |
| Diagnostic Feedback | Current-sense IS pin (analog proportional to load) | — |
| Protection Features | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) | Overload, current limit, short circuit, thermal shutdown with restart, overvoltage (load dump), undervoltage shutdown |
| Encapsulamento | PG-TSDSO-14 (exposed pad) | PG-DSO-8 (DSO-8) |
| Tipo de montagem | Surface Mount | Surface Mount |
| PWM Capability | Up to 1 kHz (typical) | — |
| Nível MSL | [DATA_NEEDED: MSL rating] | — |
| Status RoHS | Compliant | Compliant |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET (MINI-PROFET) |
| Switch Type | — | High-Side N-Channel, 1:1 |
| On-State Resistance (R_DS(on)) | — | 200 mOhm (typical) |
| Continuous Load Current | — | 1.2 A |
| Supply Voltage (Vbb) | — | 6 V to 52 V |
| Corrente de repouso | — | 0.8 mA |
| Maximum Power Dissipation | — | 1400 mW |
| Temperatura de operação | — | -40 C to +150 C |
| Configuração de saída | — | Single high-side switch |
| Diagnostic Output | — | Status pin for fault feedback |
| Load Type | — | Resistive and inductive loads |