ITS4090QEPDXUMA1 vs TLE75004EPDXUMA1 Comparison
Detailed side-by-side comparison of ITS4090QEPDXUMA1 by Infineon and TLE75004EPDXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | ITS4090QEPDXUMA1 | TLE75004EPDXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power Distribution Switches | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Product Type | Quad-Channel Smart High-Side Power Switch | Low-side power switch |
| Family | PROFET (PROtected FET) 24V/48V | — |
| Number of Channels | 4 | 4 |
| Topology | High-Side Switch (N-Channel DMOS) | — |
| Typical RDS(ON) per Channel | 90 mΩ | — |
| RDS(ON) at Tj = 125 °C | 140 mΩ (typical) | — |
| Nominal Continuous Output Current per Channel | 750 mA | — |
| Minimum Current per Channel | 500 mA | — |
| Supply Voltage Range (Operating) | 4.5 V to 45 V | — |
| Supply Voltage Range (Absolute Maximum) | -0.3 V to 45 V | — |
| On-State Input Voltage (Logic High) | [DATA_NEEDED: VIH threshold] | — |
| Operating Temperature Range | -40 °C to +150 °C (Tj) | -40 °C to +150 °C |
| Diagnostic Feedback | Current-sense IS pin (analog proportional to load) | — |
| Protection Features | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) | — |
| Package | PG-TSDSO-14 (exposed pad) | PG-TSDSO-14-41 (exposed pad) |
| Mounting Type | Surface Mount | Surface Mount |
| PWM Capability | Up to 1 kHz (typical) | — |
| MSL Level | [DATA_NEEDED: MSL rating] | 2A |
| RoHS Status | Compliant | — |
| On-State Resistance (Rdson) per Channel | — | [DATA_NEEDED: Rdson per channel] |
| Continuous Drain Current per Channel | — | 470 mA |
| Load Voltage (Vbb) | — | [DATA_NEEDED: Vbb max] |
| Number of Outputs | — | 4 |
| Input Type | — | SPI (16-bit) + parallel input pins |
| SPI Clock Frequency | — | up to 5 MHz |
| Terminal Finish | — | Tin (Sn) |
| JEDEC / JESD-609 | — | e3 |
| Qualification | — | AEC-Q100 |
| Special Features | — | 3 V cranking, Limp Home (fail-safe) mode, open-load detection |