ITS4090QEPDXUMA1 vs TLE75004EPDXUMA1 Vergleich
Detaillierter Direktvergleich von ITS4090QEPDXUMA1 von Infineon und TLE75004EPDXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | ITS4090QEPDXUMA1 | TLE75004EPDXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power Distribution Switches | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,62 | $0,93 |
| Product Type | Quad-Channel Smart High-Side Power Switch | Low-side power switch |
| Family | PROFET (PROtected FET) 24V/48V | — |
| Number of Channels | 4 | 4 |
| Topologie | High-Side Switch (N-Channel DMOS) | — |
| Typical RDS(ON) per Channel | 90 mΩ | — |
| RDS(ON) at Tj = 125 °C | 140 mΩ (typical) | — |
| Nominal Continuous Output Current per Channel | 750 mA | — |
| Minimum Current per Channel | 500 mA | — |
| Supply Voltage Range (Operating) | 4.5 V to 45 V | — |
| Supply Voltage Range (Absolute Maximum) | -0.3 V to 45 V | — |
| On-State Input Voltage (Logic High) | [DATA_NEEDED: VIH threshold] | — |
| Betriebstemperaturbereich | -40 °C to +150 °C (Tj) | -40 °C to +150 °C |
| Diagnostic Feedback | Current-sense IS pin (analog proportional to load) | — |
| Protection Features | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) | — |
| Gehäuse | PG-TSDSO-14 (exposed pad) | PG-TSDSO-14-41 (exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| PWM Capability | Up to 1 kHz (typical) | — |
| MSL-Level | [DATA_NEEDED: MSL rating] | 2A |
| RoHS-Status | Compliant | — |
| On-State Resistance (Rdson) per Channel | — | [DATA_NEEDED: Rdson per channel] |
| Continuous Drain Current per Channel | — | 470 mA |
| Load Voltage (Vbb) | — | [DATA_NEEDED: Vbb max] |
| Anzahl der Ausgänge | — | 4 |
| Input Type | — | SPI (16-bit) + parallel input pins |
| SPI Clock Frequency | — | up to 5 MHz |
| Terminal Finish | — | Tin (Sn) |
| JEDEC / JESD-609 | — | e3 |
| Qualification | — | AEC-Q100 |
| Special Features | — | 3 V cranking, Limp Home (fail-safe) mode, open-load detection |