ITS4090QEPDXUMA1 vs TLE75004EPDXUMA1 Comparaison
Comparaison détaillée côte à côte de ITS4090QEPDXUMA1 par Infineon et TLE75004EPDXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | ITS4090QEPDXUMA1 | TLE75004EPDXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power Distribution Switches | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,62 | $0,93 |
| Product Type | Quad-Channel Smart High-Side Power Switch | Low-side power switch |
| Family | PROFET (PROtected FET) 24V/48V | — |
| Number of Channels | 4 | 4 |
| Topologie | High-Side Switch (N-Channel DMOS) | — |
| Typical RDS(ON) per Channel | 90 mΩ | — |
| RDS(ON) at Tj = 125 °C | 140 mΩ (typical) | — |
| Nominal Continuous Output Current per Channel | 750 mA | — |
| Minimum Current per Channel | 500 mA | — |
| Supply Voltage Range (Operating) | 4.5 V to 45 V | — |
| Supply Voltage Range (Absolute Maximum) | -0.3 V to 45 V | — |
| On-State Input Voltage (Logic High) | [DATA_NEEDED: VIH threshold] | — |
| Plage de température de fonctionnement | -40 °C to +150 °C (Tj) | -40 °C to +150 °C |
| Diagnostic Feedback | Current-sense IS pin (analog proportional to load) | — |
| Protection Features | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) | — |
| Boîtier | PG-TSDSO-14 (exposed pad) | PG-TSDSO-14-41 (exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| PWM Capability | Up to 1 kHz (typical) | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | 2A |
| Statut RoHS | Compliant | — |
| On-State Resistance (Rdson) per Channel | — | [DATA_NEEDED: Rdson per channel] |
| Continuous Drain Current per Channel | — | 470 mA |
| Load Voltage (Vbb) | — | [DATA_NEEDED: Vbb max] |
| Nombre de sorties | — | 4 |
| Input Type | — | SPI (16-bit) + parallel input pins |
| SPI Clock Frequency | — | up to 5 MHz |
| Terminal Finish | — | Tin (Sn) |
| JEDEC / JESD-609 | — | e3 |
| Qualification | — | AEC-Q100 |
| Special Features | — | 3 V cranking, Limp Home (fail-safe) mode, open-load detection |