ITS4090QEPDXUMA1 vs TLE75004EPDXUMA1 Comparação
Comparação detalhada lado a lado de ITS4090QEPDXUMA1 por Infineon e TLE75004EPDXUMA1 por Infineon. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | ITS4090QEPDXUMA1 | TLE75004EPDXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoria | Power Distribution Switches | Power MOSFET Drivers |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $1,62 | $0,93 |
| Product Type | Quad-Channel Smart High-Side Power Switch | Low-side power switch |
| Family | PROFET (PROtected FET) 24V/48V | — |
| Number of Channels | 4 | 4 |
| Topologia | High-Side Switch (N-Channel DMOS) | — |
| Typical RDS(ON) per Channel | 90 mΩ | — |
| RDS(ON) at Tj = 125 °C | 140 mΩ (typical) | — |
| Nominal Continuous Output Current per Channel | 750 mA | — |
| Minimum Current per Channel | 500 mA | — |
| Supply Voltage Range (Operating) | 4.5 V to 45 V | — |
| Supply Voltage Range (Absolute Maximum) | -0.3 V to 45 V | — |
| On-State Input Voltage (Logic High) | [DATA_NEEDED: VIH threshold] | — |
| Faixa de temperatura de operação | -40 °C to +150 °C (Tj) | -40 °C to +150 °C |
| Diagnostic Feedback | Current-sense IS pin (analog proportional to load) | — |
| Protection Features | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) | — |
| Encapsulamento | PG-TSDSO-14 (exposed pad) | PG-TSDSO-14-41 (exposed pad) |
| Tipo de montagem | Surface Mount | Surface Mount |
| PWM Capability | Up to 1 kHz (typical) | — |
| Nível MSL | [DATA_NEEDED: MSL rating] | 2A |
| Status RoHS | Compliant | — |
| On-State Resistance (Rdson) per Channel | — | [DATA_NEEDED: Rdson per channel] |
| Continuous Drain Current per Channel | — | 470 mA |
| Load Voltage (Vbb) | — | [DATA_NEEDED: Vbb max] |
| Número de saídas | — | 4 |
| Input Type | — | SPI (16-bit) + parallel input pins |
| SPI Clock Frequency | — | up to 5 MHz |
| Terminal Finish | — | Tin (Sn) |
| JEDEC / JESD-609 | — | e3 |
| Qualification | — | AEC-Q100 |
| Special Features | — | 3 V cranking, Limp Home (fail-safe) mode, open-load detection |