ITS6080SEPDXUMA1 vs BTS70402EPGXUMA1 Comparison
Detailed side-by-side comparison of ITS6080SEPDXUMA1 by Infineon and BTS70402EPGXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Infineon
ITS6080SEPDXUMA1
ITS6080SEPDXUMA1 - 8A Smart High-Side Switch | Infineon
ITS6080SEPDXUMA1 β ActiveInfineon
BTS70402EPGXUMA1
BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon
BTS70402EPGXUMA1 β ActiveSpecification Comparison
| Parameter | ITS6080SEPDXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $1.72 | $3.18 |
| Product Type | Smart High-Side Power Switch | β |
| Family | PROFET Industrial 75 mOhm | β |
| Number of Channels | 1 | 4 |
| On-State Resistance (Rds(on)) | 75 mOhm typical | β |
| Continuous Load Current | 8 A | β |
| Operating Supply Voltage (Vbb) | 5 V to 34 V | β |
| Load Dump Protection | 62 V | β |
| Switch Type | N-Channel high-side | β |
| Output Configuration | 1:1 (high-side) | High-side, N-channel MOSFET |
| Package | PG-TSDSO-14 (14-pin TSDSO with exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Operating Temperature Range | -40 C to +150 C | -40 Β°C to +150 Β°C junction |
| Diagnostic Features | Current sense output, fault feedback | β |
| Protection Features | Overload current limit, short-circuit shutdown, thermal shutdown, over-voltage clamp, ESD protection | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Mounting Type | Surface Mount | Surface Mount |
| MSL Level | [DATA_NEEDED: MSL rating] | β |
| Automotive Qualification | AEC-Q100 qualified | β |
| Manufacturer | β | Infineon Technologies |
| Part Family | β | PROFET+2 (BTS70xxx series) |
| Function | β | Smart High-Side Power Switch |
| Continuous Load Current per Channel | β | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | β | 65 mOhm typical |
| Operating Voltage Range | β | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | β | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | β | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | β | Qualified (automotive grade) |
| RoHS Compliance | β | Compliant |