ITS6080SEPDXUMA1 vs BTS70402EPGXUMA1 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng ITS6080SEPDXUMA1 sa pamamagitan ng Infineon at BTS70402EPGXUMA1 sa pamamagitan ng Infineon. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Infineon
BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon
BTS70402EPGXUMA1 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | ITS6080SEPDXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Kategorya | Power MOSFET Drivers | Power MOSFET Drivers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | Smart High-Side Power Switch | — |
| Family | PROFET Industrial 75 mOhm | — |
| Number of Channels | 1 | 4 |
| On-State Resistance (Rds(on)) | 75 mOhm typical | — |
| Continuous Load Current | 8 A | — |
| Operating Supply Voltage (Vbb) | 5 V to 34 V | — |
| Load Dump Protection | 62 V | — |
| Switch Type | N-Channel high-side | — |
| Output Kumpigurasyon | 1:1 (high-side) | High-side, N-channel MOSFET |
| Packhaging | PG-TSDSO-14 (14-pin TSDSO with exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Hanay ng Temperature na Operasyon | -40 C to +150 C | -40 °C to +150 °C junction |
| Diagnostic Features | Current sense output, fault feedback | — |
| Protection Features | Overload current limit, short-circuit shutdown, thermal shutdown, over-voltage clamp, ESD protection | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Level ng MSL | [DATA_NEEDED: MSL rating] | — |
| Automotive Qualification | AEC-Q100 qualified | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Fungsi | — | Smart High-Side Power Switch |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |