ITS6080SEPDXUMA1 vs BTS70402EPGXUMA1 Vergleich
Detaillierter Direktvergleich von ITS6080SEPDXUMA1 von Infineon und BTS70402EPGXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | ITS6080SEPDXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,72 | $3,18 |
| Product Type | Smart High-Side Power Switch | — |
| Family | PROFET Industrial 75 mOhm | — |
| Number of Channels | 1 | 4 |
| On-State Resistance (Rds(on)) | 75 mOhm typical | — |
| Continuous Load Current | 8 A | — |
| Operating Supply Voltage (Vbb) | 5 V to 34 V | — |
| Load Dump Protection | 62 V | — |
| Switch Type | N-Channel high-side | — |
| Ausgangskonfiguration | 1:1 (high-side) | High-side, N-channel MOSFET |
| Gehäuse | PG-TSDSO-14 (14-pin TSDSO with exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Betriebstemperaturbereich | -40 C to +150 C | -40 °C to +150 °C junction |
| Diagnostic Features | Current sense output, fault feedback | — |
| Protection Features | Overload current limit, short-circuit shutdown, thermal shutdown, over-voltage clamp, ESD protection | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL rating] | — |
| Automotive Qualification | AEC-Q100 qualified | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Funktion | — | Smart High-Side Power Switch |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |