ITS6080SEPDXUMA1 vs BTS70402EPGXUMA1 Comparación
Comparación detallada lado a lado de ITS6080SEPDXUMA1 por Infineon y BTS70402EPGXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | ITS6080SEPDXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,72 | $3,18 |
| Product Type | Smart High-Side Power Switch | — |
| Family | PROFET Industrial 75 mOhm | — |
| Number of Channels | 1 | 4 |
| On-State Resistance (Rds(on)) | 75 mOhm typical | — |
| Continuous Load Current | 8 A | — |
| Operating Supply Voltage (Vbb) | 5 V to 34 V | — |
| Load Dump Protection | 62 V | — |
| Switch Type | N-Channel high-side | — |
| Configuración de salida | 1:1 (high-side) | High-side, N-channel MOSFET |
| Encapsulado | PG-TSDSO-14 (14-pin TSDSO with exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Rango de temperatura de funcionamiento | -40 C to +150 C | -40 °C to +150 °C junction |
| Diagnostic Features | Current sense output, fault feedback | — |
| Protection Features | Overload current limit, short-circuit shutdown, thermal shutdown, over-voltage clamp, ESD protection | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel MSL | [DATA_NEEDED: MSL rating] | — |
| Automotive Qualification | AEC-Q100 qualified | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Función | — | Smart High-Side Power Switch |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |