LM2901VDG vs LM2901DG Comparison
Detailed side-by-side comparison of LM2901VDG by onsemi and LM2901DG by onsemi. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | LM2901VDG | LM2901DG |
|---|---|---|
| Brand | onsemi | onsemi |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Comparator Type | General-purpose differential comparator | General Purpose |
| Number of Channels | 4 channels | — |
| Single-Supply Voltage Range | 3 V to 36 V | 3 V to 36 V |
| Dual-Supply Voltage Range | ±1.5 V to ±18 V | ±1.5 V to ±18 V |
| Tested Maximum Supply Voltage | 30 V | — |
| Output Type | Open-collector, CMOS and TTL compatible | Open Collector |
| Input Offset Voltage | 2 mV | — |
| Input Bias Current | 25 nA | — |
| Supply-Current Drain | 0.8 mA typical | — |
| Operating Temperature Range | -40°C to +125°C | -40°C to +105°C |
| Package | 14-SOIC, 0.154 inch / 3.90 mm width | 14-SOIC |
| Mounting Type | Surface mount | Surface Mount |
| Manufacturer Description | Single-supply quad comparator | — |
| RoHS Status | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Differential Input Voltage Range | [DATA_NEEDED: differential input voltage range] | — |
| Response Time | [DATA_NEEDED: comparator response time] | 1.3 us |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Number of Comparators | — | 4 |
| Output Compatibility | — | CMOS, TTL |
| Supply Current | — | 1 mA |
| Maximum Input Bias Current | — | 0.25 uA at 5 V |
| Typical Low Input Bias Current | — | 25 nA |
| Typical Input Offset Current | — | ±5 nA |
| Typical Low Output Saturation Voltage | — | 130 mV at 4 mA |