LM2901VDG vs LM2901DG Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM2901VDG tarafından onsemi ve LM2901DG tarafından onsemiAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | LM2901VDG | LM2901DG |
|---|---|---|
| Marka | onsemi | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Comparator Type | General-purpose differential comparator | General Purpose |
| Number of Channels | 4 channels | — |
| Single-Supply Voltage Range | 3 V to 36 V | 3 V to 36 V |
| Dual-Supply Voltage Range | ±1.5 V to ±18 V | ±1.5 V to ±18 V |
| Tested Maximum Supply Voltage | 30 V | — |
| Çıkış Türü | Open-collector, CMOS and TTL compatible | Open Collector |
| Input Offset Voltage | 2 mV | — |
| Input Bias Current | 25 nA | — |
| Supply-Current Drain | 0.8 mA typical | — |
| İşletim Sıcaklığı Aralığı | -40°C to +125°C | -40°C to +105°C |
| Paket | 14-SOIC, 0.154 inch / 3.90 mm width | 14-SOIC |
| Montaj Türü | Surface mount | Surface Mount |
| Manufacturer Description | Single-supply quad comparator | — |
| RoHS Durumu | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Differential Input Voltage Range | [DATA_NEEDED: differential input voltage range] | — |
| Response Time | [DATA_NEEDED: comparator response time] | 1.3 us |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Number of Comparators | — | 4 |
| Output Compatibility | — | CMOS, TTL |
| Besleme Akımı | — | 1 mA |
| Maximum Input Bias Current | — | 0.25 uA at 5 V |
| Typical Low Input Bias Current | — | 25 nA |
| Typical Input Offset Current | — | ±5 nA |
| Typical Low Output Saturation Voltage | — | 130 mV at 4 mA |