LM2901VDG vs LM2901DG השוואה
השוואה מפורטת זה לצד זה של LM2901VDG מאת onsemi ו LM2901DG מאת onsemi. השווה מפרטים עיקריים, פרמטרים חשמליים, אריזה, סטטוס מחזור חיים, תמחור וזמינות כדי לקבוע את הרכיב הטוב ביותר לדרישות העיצוב שלך.
השוואת מפרטים
| פרמטר | LM2901VDG | LM2901DG |
|---|---|---|
| מותג | onsemi | onsemi |
| קטגוריה | Amplifier ICs | Amplifier ICs |
| סטטוס מחזור חיים | פעיל | פעיל |
| Comparator Type | General-purpose differential comparator | General Purpose |
| Number of Channels | 4 channels | — |
| Single-Supply Voltage Range | 3 V to 36 V | 3 V to 36 V |
| Dual-Supply Voltage Range | ±1.5 V to ±18 V | ±1.5 V to ±18 V |
| Tested Maximum Supply Voltage | 30 V | — |
| סוג פלט | Open-collector, CMOS and TTL compatible | Open Collector |
| Input Offset Voltage | 2 mV | — |
| Input Bias Current | 25 nA | — |
| Supply-Current Drain | 0.8 mA typical | — |
| טווח טמפרטורת פעולה | -40°C to +125°C | -40°C to +105°C |
| מארז | 14-SOIC, 0.154 inch / 3.90 mm width | 14-SOIC |
| סוג הרכבה | Surface mount | Surface Mount |
| Manufacturer Description | Single-supply quad comparator | — |
| סטטוס RoHS | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Differential Input Voltage Range | [DATA_NEEDED: differential input voltage range] | — |
| Response Time | [DATA_NEEDED: comparator response time] | 1.3 us |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Number of Comparators | — | 4 |
| Output Compatibility | — | CMOS, TTL |
| זרם אספקה | — | 1 mA |
| Maximum Input Bias Current | — | 0.25 uA at 5 V |
| Typical Low Input Bias Current | — | 25 nA |
| Typical Input Offset Current | — | ±5 nA |
| Typical Low Output Saturation Voltage | — | 130 mV at 4 mA |